The battery is not charging, probably because the alternator has no output. Exchange alternators are readily available but not cheap. Check alternator belt tension. Remove, inspect and replace alternator carbon brush pack as necessary. After that, if still not charging, swop out the regulator.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
A 1991 Toyota 4runner is bigger than a 1990 4runner
Im having problems removing the A100 fuse from a 99 Toyota 4runner from behind the battery
unhook the battery for about a minute or so, then reconnect!
You open the remote with a coin or small screwdriver, and pop the battery out. My 4Runner uses a CR2016 battery, which you can pick up at Walmart or any hardware store. Put the battery in with the + sign facing south, and you should be all set.
have you tried pulling the EFI fuse
Check your maintenance manual. It's in there.
There is no recall for the Toyota 4runner transmission. Some Toyota's have had break problems that may have started the recall rumors on some Toyota products but, there is no recall for the Toyota 4runner transmission.
There's a Phillips screw at the top of the marker light. You would need to unscrew that and then you will be able to remove the side marker light from your Toyota 4Runner. We have also included a link to a video in the related links section below.
To reset the check engine light on a 2004 Toyota 4Runner, you can disconnect the negative battery terminal for about 15 minutes. This will clear the vehicle's computer memory, including the check engine light. Alternatively, you can use an OBD-II scanner to erase the trouble codes directly. However, ensure that any underlying issues are addressed before resetting the light, as it may come back on if the problem persists.
The 2014 Toyota 4Runner has a V6 engine.
The 2008 Toyota 4Runner has 24 valves.