take to the local auto store most will scan it for free and let you know what is wrong.
To remove the seat from a Lexus IS300, start by disconnecting the negative battery terminal to ensure safety. Then, locate and remove the bolts securing the seat to the floor, usually found at the front and back of the seat. After removing the bolts, tilt the seat backward and disconnect any electrical connectors for power seats or airbags if applicable. Finally, lift the seat out of the vehicle carefully.
To change the oil on a Lexus IS300, start by gathering your supplies: new oil, an oil filter, an oil catch pan, and necessary tools. First, lift the car and secure it on jack stands, then remove the oil drain plug and let the old oil drain completely into the pan. Next, replace the oil filter using an oil filter wrench, then reinstall the drain plug. Finally, refill the engine with new oil through the oil filler cap and check the level with the dipstick to ensure it's at the correct level.
The answer is Yes, Lexus is the luxury brand of Toyota. Most parts for Lexus are the same for Toyota. From the regular Toyota models its developers were challenged to created more luxury vehicle and that is when Lexus was developed. Lexus is more luxury category. Some notable cars are: Toyota Altezza is sold as a Lexus IS300 Toyota Soarer is sold as a Lexus SC300 Since 2005 Toyota Japan has opened Lexus dealerships in Japan. It's the equivalent of Acura: Luxury Honda and Infinity: Nissan
To remove the front hub assembly on a 2002 Lexus IS300, start by safely lifting the vehicle and removing the front wheel. Disconnect the brake caliper and rotor, then remove the axle nut. After that, detach the tie rod end and lower ball joint, and finally, unbolt the hub assembly from the strut and remove it carefully. Ensure all components are properly supported and refer to a repair manual for specific torque specifications during reassembly.
To change the tail lights on a Lexus IS300, start by opening the trunk and locating the access panel behind the tail light assembly. Remove the screws or clips securing the panel and carefully pull it away to expose the tail light bulbs. Twist the socket counterclockwise to remove the old bulb and replace it with a new one, ensuring it’s securely in place. Finally, reassemble the access panel and test the new tail lights to ensure they function correctly.
SERVICE YOUR CAR ENGINE!!!! SERVICE YOUR CAR ENGINE!!!!
turn off engine, and start again
If the 2001 Mitsubishi Mirage won't start and has the service engine light on, you probably have an issue with a sensor. This could be a problem with an electrical or oxygen sensor.
2003 Lexus IS300 tail light bulb replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the tail light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Why my infiniti QX56 doesn't want to start, the service engine light is on? is it because i stayed without gas, or whats causing for it not to start. A tuneup has been done..
if its mild smoke that means the engine warming up if it big cloud of smoke then its the engine block is no good..happened to mee too so i did a swap
The "Service Engine" light is the computer's way of telling you that it has something to tell you. Connect a scanner and see what it says.