check fuse for fuel pump and ignition, also make sure your immobilizer is ok,,,,sometimes they hook them up to the coil,,,,which means,,,no spark
On the shifter there should be a button that says something to the effect of "O/D off" push it.
The 2000 Hyundai Excel indicator light and brake light might stop working all of a sudden because of a burned out bulb. Check all bulbs on the brake lights and turn signals. This problem could also be caused by a blown fuse or a blown flasher fuse.
If a 1997 Honda Civic will not star there may be an issue spark. When there isn't enough spark to ignite the fuel the car will not turn on.
To open the radiator in your Hyundai Excel, first make sure the engine is cool to avoid burns. Locate the radiator cap, which is usually on top of the radiator, and turn it counterclockwise to release any built-up pressure. Once it's safe, you can fully remove the cap to access the coolant. Always check the owner's manual for specific instructions related to your model.
To reset the immobiliser on a 1994 Hyundai Excel, first ensure that you have the correct key for the vehicle. Insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off, then turn the key to the "Off" position and back to "On" again. This process should reset the immobiliser, allowing you to start the car. If issues persist, consult a professional mechanic or the vehicle's manual for further assistance.
To remove the ignition barrel from a Hyundai Excel, first disconnect the car battery to ensure safety. Next, remove the steering column covers to access the ignition assembly. Insert the key and turn it to the "On" position while pressing the release pin or tab on the ignition barrel. Finally, pull the barrel out gently, making sure to disconnect any wiring harnesses attached to it.
To remove the ignition barrel from a 1998 Hyundai Excel, first ensure the battery is disconnected for safety. Use a flathead screwdriver to gently pry off the plastic cover surrounding the ignition switch. Locate the release pin or screw on the ignition barrel, which may require the key to be in the "ON" position to access it; if the key won't turn, you might need to drill out the lock. Once the release mechanism is disengaged, pull the ignition barrel out of the steering column.
Answer: Replace Hyundai Sonata.
Hyundai accent idle speed
first of all do you have any dash lights coming on.(is there power from the battery)
To turn on the fireplace, insert the key into the designated keyhole and turn it clockwise. This will ignite the fireplace and start the flames.
how to replace the flasher relay on a hyundai accent 1999