answersLogoWhite

0

To answer your question: no, E10 will not damage your engine because it burns hotter. If you use fuel containing higher than 10%, you might see problems then. However, what you should be cautious of when using E10 is its extremely solvency and degradation of fuel system parts, injectors, gaskets and seals. Since you're driving a pretty old vehicle I would suggest looking for non-ethanol blended fuel by testing gas at the pump before purchase. Using E10 can not only damage fuel system components, but it will decrease mileage and negatively affect performance since it gives off less energy when burned. It gives off approximately 111,000 BTU's when burned compared to regular gasoline's 125,000 BTU's. This means you'll see a drop of approx. 10% in horsepower and mileage. If you drive a 4Runner with the big V8 you might see an even bigger drop.

If you cannot find non-ethanol gas and these problems arise I would recommend using Eth-Guard, the complete fuel additive for all ethanol problems. Eth-Guard is safe in all engines and contains no harmful ingredients such as alcohol (why use more?), MMT, MTBE, TEL or lead. Eth-Guard will lubricate the vital fuel system components - prolonging their lives, increases the energy of the fuel (Eth-Guard gives off approx. 150,000 BTU's - this will increase mileage and performance) and will prevent phase separation in most applications.

To view Eth-Guard visit: www.e10gasadditives.com/product_ethguard.html

To view more information in E10 visit: www.fueltestkit.com

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Does Toyota 4runner 2001 have timing belt ot chain?

The 2001 3.4 L V6 Toyota 4Runner has a cam belt. The belt must be replaced every 90,000 miles. Warning: This is an interference engine. If the belt breaks you will have serious engine damage.


What damage could result from ethanol in a gasoline engine?

Ethanol can cause damage to engine parts. It can also lead to damage with seals that protect your motor because it eats away at rubber.


Does 2004 Toyota 4runner have a timing chain?

Your 2004 Toyota 4Runner has a timing belt if it is a V8. This belt must be replaced every 90,000 miles. Warning: This is an interference engine. Severe engine damage will be done if the belt breaks. If you have a V6 then it has a chain which should last the life of the engine.


When to change timing belt for Toyota 4runner 2012 sr5?

The timing belt for a 2012 Toyota 4Runner SR5 should generally be replaced every 90,000 to 100,000 miles, as recommended by Toyota. However, it's essential to consult the owner's manual for your specific vehicle, as maintenance schedules can vary based on driving conditions and habits. Regular inspections can also help determine if a replacement is needed sooner if there are signs of wear or damage.


2003 Toyota 4runner it have a timing chain or belt and when should it be replaced?

The 2003 Toyota 4Runner is equipped with a timing belt, not a chain. It is recommended to replace the timing belt every 90,000 miles or every 6 years, whichever comes first, to prevent potential engine damage. Regular maintenance checks can help ensure it is replaced on time. Always refer to the owner's manual for specific recommendations.


What is the torque on the camshaft sprocket bolt in a 1990 Toyota 4Runner 3.0 liter?

The torque specification for the camshaft sprocket bolt in a 1990 Toyota 4Runner with a 3.0-liter engine is typically around 43 ft-lbs (58 Nm). It's important to use a torque wrench to ensure proper tightening and avoid damage to the engine components. Always refer to the vehicle's service manual for the most accurate specifications and procedures.


How do you manually close the sunroof on a 2003 Toyota 4Runner?

To manually close the sunroof on a 2003 Toyota 4Runner, locate the manual sunroof override tool, which is typically found in the owner’s manual or in the vehicle's tool kit. Remove the plastic cover from the sunroof motor, then insert the tool into the slot in the motor and turn it clockwise to close the sunroof. Ensure that you apply gentle pressure and avoid forcing it to prevent damage. After closing, replace the plastic cover to protect the mechanism.


How do you remove center console on Toyota 4Runner?

To remove the center console on a Toyota 4Runner, first, ensure the vehicle is in park and the ignition is off. Begin by removing any screws or fasteners located in the storage compartment and under the armrest. Next, carefully pry up the trim around the console, disconnect any electrical connectors (such as for the power outlet or USB ports), and then lift the console out of place. Be cautious not to damage any clips or connectors during the process.


Where can you fine Ethanol free gas in Missouri?

All gasoline except premium is mandated to have at least 10% ethanol. Sorry. Some stations (brands) have premium with out ethanol (Missouri law allows this), the trouble is finding out who has it. Ethanol does substantial damage fast in small engines and cars older that 14 years and some damage in newer cars. Do not use ethanol with a fiberglass or plastic gas tank=engine suicide.


Can a 2001 Honda accord use ethanol?

Nothing over E15 (15% ethanol) and it should be fine. It could run on E85 (85% ethanol) in an emergency, but it may damage fuel system components.


Does ethanol affect or damage car engines?

E-85 will if the engine is not designed for it. Normal 15% ethanol gasoline mixtures are safe on all engines.


2005 Toyota 4Runner v8 gets code p2440 when start up?

The P2440 code for a 2005 Toyota 4Runner indicates a problem with the Secondary Air Injection System, specifically related to the Air Switching Valve. This can be caused by a malfunctioning valve, a blockage in the air passages, or an issue with the control circuit. It's advisable to inspect the air injection system components for damage or debris and to check the electrical connections for continuity. Addressing this issue is important for maintaining emissions compliance and optimal engine performance.