inlet 2 to 6 thou. exhaust 6 to 10 thou.
I own a 2002 Mazda B-2900 pick-up (Japanese model) that uses the 2.9 litre "WL" turbo diesel engine.
what are the specification of valve adjustment for 2000 ford ranger wl inlet
If it is the WL turbo engine it is located right under the turbo
inlet 2 to 6 thou. exhaust 6 to 10 thou. 0.05-0.15 mm inlet. 0.15-0.25mm exhaust. I have done mine today and confirm these settings are good. Nice and quiet now
Mazda B2600 has the G6 Engine Oil capacity (L {US qt, Imp qt}) Engine Item F2 G6 (WL, WL Turbo) Oil replacement 3.9{4.1, 3.4}4.5{4.8, 4.0}5.6{5.9, 4.9} Oil and oil filter replacement 4.2{4.4, 3.7}4.7{5.0, 4.4}6.3{6.7, 5.5} Total(dry engine) 4.6{4.9, 4.0}5.5{5.8, 4.8}6.7{7.1, 5.9}
The Mazda WL motor is a turbo diesel, so there is no spark distributor or spark plugs to work with. Put the crankshaft pulley on TDC. Check that is is correct by checking that the mark on the FIP (Fuel injection pump) is pointing to the tab on the housing (approx 10 o clock). If it is at 4pm, the engine is out by 180 degrees. Now check that the indent on the camshaft pulley is at 12 o clock. Interesting to note that whilst the engine turns clockwise, the FIP and camshaft turns in the opposite direction.
X=TL (traverse line) Y=BL (buttock line) Z=WL (waterline)
Logic of WL, TL, BL in autoimobile drawing
the cam must be on one with the destributer,look for 2 marks on destributer make sure that stay togetter and put piston #1 on top after check it out with a timing gun
Clearly in the first place, you better elect any diverse WL
The symbol for WL Ross Holding Corp. in NASDAQ is: WLRHU.
WL Ross Holding Corp. (WLRHU) had its IPO in 2014.