usually the valve cover gasket and the oil seals on the top of the cover,replace gasket and the also the distributor seal
yes they will
In the head at the end of the spark plug wires.
remove the spark plug wires one at a time and unscrew the plugs
go from driver side 1234
Click the link and choose the correct engine.
Might need new spark plugs and maybe spark plug wires too.
1-3-4-2 Distributor rotates clockwise.
This is a Honda only code which means you have a random cylinder misfire. If you have not replaced the Spark Plugs & Wires, do so now. Use OEM spark plugs.
Spark plug wires on a Honda Accord should fit snugly onto the spark plugs and ignition coils. While they may have some flexibility, they should not be excessively loose, as this can lead to misfires or poor engine performance. If you notice that the wires are loose, it's advisable to check for wear or damage and consider replacing them to ensure proper engine function.
left side of engine directly under the distibutor (where the spark plug wires plug into)
there are four spark plug wires that run to the distributor..the fifth one is the coil wire
It could be caused by not getting the spark plug boot on quite right after replacing the plug wires.