Hold down the set button when it is in the normal mode (where it shows the time and date) (this button should be labeled, if not then try the upper left button). Then wait a little while until it comes up saying "TIME", at this point press the "next" button, which is normally what is labeled (not on the screen) as "Mode". You will then get to the screen with the time and date. Continue pressing the "next"/"mode" button until you get to the day, then set the day with the "start/spilt"/"+" and the "stop/reset"/"-" button. Once that is done press mode again and you get to the date which you set the same way as the day. When done press the "done"/"set" button.
Sorry, these directions are kinda confusing, but its hard to explain these things.
To set the date on a Timex Indiglo watch, first, pull the crown (the small knob on the side of the watch) out to the second position. Turn the crown clockwise until the desired date is displayed in the date window. Push the crown back in to its original position to set the date. Remember to adjust the time as needed after setting the date to ensure accuracy.
To set the time on your Timex tide temp watch, press and hold the "mode" button until the time digits start flashing. Use the "advance" and "select" buttons to adjust the hours, minutes, and date. To set the tide and temperature functions, refer to the user manual which can guide you through the specific steps.
To set the compass on your Timex Expedition E-Tide Temp watch, press the mode button until you reach the compass mode. Next, rotate the watch horizontally a few times to calibrate the compass. Once calibrated, point the watch's 12 o'clock position towards the North to use the compass feature.
To change the date format on your Atlantis 100 Timex watch from month-day to day-month, you would typically need to refer to the user manual or instructions provided by Timex. It usually involves adjusting the settings in the watch's menu or mode options to select the desired date format. If you no longer have the manual, you can try contacting Timex customer support for assistance.
To set the date on a Quamer 1504 watch, first pull the crown out to the second position. Turn the crown clockwise to adjust the date. Once the date is set, push the crown back to its original position to ensure the watch is sealed and protected. Always avoid changing the date when the watch is in the PM hours to prevent damage to the movement.
To set the date on a Timex Indiglo watch, first, pull the crown (the small knob on the side of the watch) out to the second position. Turn the crown clockwise until the desired date is displayed in the date window. Push the crown back in to its original position to set the date. Remember to adjust the time as needed after setting the date to ensure accuracy.
I have received no information.
To set the time on your Timex tide temp watch, press and hold the "mode" button until the time digits start flashing. Use the "advance" and "select" buttons to adjust the hours, minutes, and date. To set the tide and temperature functions, refer to the user manual which can guide you through the specific steps.
To set the date on a Timex T276B clock radio, start by pressing the "Time/Date" button on the top of the clock. Use the "Hour" and "Minute" buttons to adjust the date. Press the "Time/Date" button again to confirm the date setting.
In order to reset the time on the Timex Ironman Watch, locate the mode button and press it until the time and date show. Then locate the set button, press and hold until the word time appears and then release the button. Now set the time and press the set button one more time. The time has been reset and complete.
Takes a lickin' and keeps on tickin' = Timex watches
One way to set the time on a Timex is to press the mode button on the watch until it displays the time. Press set button and than the start/split button to change the time. Press the stop/reset button to decrease and press the set button again to set the time. Please refer to the related link for more information.
Timex T29781
set time timex t123s
To set the compass on your Timex Expedition E-Tide Temp watch, press the mode button until you reach the compass mode. Next, rotate the watch horizontally a few times to calibrate the compass. Once calibrated, point the watch's 12 o'clock position towards the North to use the compass feature.
A Timex military watch can be purchased online on the official Timex website. You will need to provide a valid electronic payment and a valid shipping address.
amazon.com and the timex.com website