Press mode button three times
The seconds will flash, press start/stop button to reset it
Press lap/reset button
The minutes will flash, press start/stop button to advance it
Press lap/reset button
The hour will flash, press start/stop button to advance it
Press lap/reset button
The date will flash, press start/stop button to advance it
Press lap/reset button
The month will flash, press start/stop button to advance it
Press lap/reset button
The day of the week will flash, press start/stop button to advance it
To set the time on a Stauer watch, pull the crown out to the time-setting position. Turn the crown clockwise or counterclockwise to adjust the time to the desired hour and minute. Push the crown back in once the correct time is set.
To set the time on a Rolex Day-Date watch, gently pull out the crown to the first position and rotate it to set the date. Pull the crown out to the second position and turn it clockwise to set the time. Finally, once you have set the time, push the crown back in to the original position to complete the process.
To set the time on a Stauer titanium atomic watch, first ensure the watch is receiving a signal from an atomic clock. If not, manually set the time using the crown. Pull the crown out to the time-setting position and rotate it to adjust the time. Push the crown back in once the correct time is set.
To set the time on the Skyscan atomic clock model 86715, first, ensure the clock is plugged in and powered on. Press the "SET" button, then use the "HOUR" and "MINUTE" buttons to adjust the time. After setting the correct time, press "SET" again to confirm the changes. The clock should then display the updated time.
To set the time and date on a Nixon watch, pull the crown out to the furthest position. Turn the crown to set the time, and push it back in one notch to set the date. Make sure to press the crown all the way in to secure your settings.
ex. /time set (time) ex. /time set day or /time set night
The command is: /time set day or /time set night. You can also use numbers (ex. /time set 15000, /time set 0, /time set 10000, etc.).
/time set 0
open the chat and type /time set <number>. For example, /time set 0 would make it morning, and /time set 14000 would be night.
digitel time set
the clock is set for time
To set the time on a Sharp Accu-Set clock model SPC991, first, locate the "Time Set" button on the back or bottom of the clock. Press and hold this button until the time display starts blinking. Use the "Hour" and "Minute" buttons to adjust the time to the correct hour and minute. Once the time is set, release the "Time Set" button to save the new time.
First you get a clock. Next look at your Phone then use the time on you phone to set the time.
The low-set stage is a current with a definite time or inverse-time operation. The high-set stage has a definite time characteristic only without the inverse-time operation.
how do I set time on a wal mart aw watch
Any atomic clock will automatically set the time.
Basically, it depends on what time you set in your tamagotchi. If you set it at a different time then Earth time it could effect your tamagotchi by when it sleeps or wakes up. Basically, it depends on what time you set in your tamagotchi. If you set it at a different time then Earth time it could effect your tamagotchi by when it sleeps or wakes up.