0
What else can I help you with?
How does the space shuttle slow down on re-entry?
A space shuttle slowdown on reentry is one of the biggest achievements of Aerospace Engineering. What happens is when shuttle comes in contact with earth's atmosphere then because of friction with air particles it gets too hot below its surface (because of which Columbia disaster happens) this heat gives a very large amount of energy to shuttle which should be removed to slow it down from almost 26000Kmph to 200-300 kph and this is done by 5 supercomputers on board of shuttle with almost no involvement of humans accepted. What they do is that they tilt the shuttle on its middle axis pointing towards outer end of the wing so that air can easily flow through other wing to cool it down but strictly direction of landing path is not changed (because this may cause sever damage to shuttle at this speed) this is done to cool down the shuttle before touching the ground. This process is repeated many times on both of the wings to cool down the shuttle, at the end when shuttle looses max of its potential ,kinetic and thermal energy the shuttle becomes an airplane type and all the controls is transferred to the pilot for save landing on airport.
What is the part of a shuttle that carries the payload?
Payload is carried in the Space Shuttle's Payload Bay. The payload bay is situated behind the crew cabin, in the middle of the orbiter. It is 60 ft long and 15 ft wide. The payload bay has two large doors that open once the shuttle reaches orbit. On the inner side of these doors are radiators which help cool the shuttle. Inside the payload bay, there are latches to hold satellites, space station components, experiments, and other objects in place. The payload bay also holds the space shuttle's remote manipulating system (RMS), KU-band antenna, and several cameras and lights. The space shuttle is capable of carrying about 65,000 pounds of cargo in the payload bay.
Is mica used on the space shuttle?
Oh, dude, mica is actually used on the space shuttle. Yeah, it's like this heat-resistant material that can handle the extreme temperatures up there. So, like, next time you see a space shuttle, just know it's got some mica hanging out on it, keeping things cool.
Can you see the space shuttle from Orlando?
Yes. If I can see it from Tampa, FL, than you can definitely see it from Orlando. If you are in South Orlando, then look due east. If you are in Central or North Orlando, then look ESE. The shuttle is supposed to launch 6/17/09 at 5:40 a.m. since it will be dark, there is now way you can miss it even if you do not know what direction east is. I am in Gainesville, FL (Go Gators!) and I can see it when I look SE. It is awesome. I remember driving on the Florida Turnpike at night and in the middle of nowhere I say what looked like a new town, but later realized it was the shuttle launching. It lit up the entire sky. You are lucky to be in Orlando since you are about 50 miles away. When I say the Shuttle launch in Melbourne, you could actually hear it (standing on the beach). The sound was almost a minute late, but it was still pretty cool.
What are the three cool colors?
the three cool colors are blue, green ,purple
Why is hydrogen used in the space shuttle engine?
To fuel it and cool it
How does the space shuttle slow down on re-entry?
A space shuttle slowdown on reentry is one of the biggest achievements of Aerospace Engineering. What happens is when shuttle comes in contact with earth's atmosphere then because of friction with air particles it gets too hot below its surface (because of which Columbia disaster happens) this heat gives a very large amount of energy to shuttle which should be removed to slow it down from almost 26000Kmph to 200-300 kph and this is done by 5 supercomputers on board of shuttle with almost no involvement of humans accepted. What they do is that they tilt the shuttle on its middle axis pointing towards outer end of the wing so that air can easily flow through other wing to cool it down but strictly direction of landing path is not changed (because this may cause sever damage to shuttle at this speed) this is done to cool down the shuttle before touching the ground. This process is repeated many times on both of the wings to cool down the shuttle, at the end when shuttle looses max of its potential ,kinetic and thermal energy the shuttle becomes an airplane type and all the controls is transferred to the pilot for save landing on airport.
Fleas accelerate 50 times faster than?
The answer is a space-shuttle. So cool, right!
Why is reinforced polycarbonate used for space shuttle windows?
It's actually not used in space shuttle windows. Aluminum and polycarbonate have very different thermal expansion rates so the polycarbonate windows would crack as they cool off when the space shuttle goes accross the dark side of the earth.
What are some sinificant discoveries or contributions to science by a space shuttle?
they have given us a place to discover many cool andsignificant things inside of our universe
What is the part of a shuttle that carries the payload?
Payload is carried in the Space Shuttle's Payload Bay. The payload bay is situated behind the crew cabin, in the middle of the orbiter. It is 60 ft long and 15 ft wide. The payload bay has two large doors that open once the shuttle reaches orbit. On the inner side of these doors are radiators which help cool the shuttle. Inside the payload bay, there are latches to hold satellites, space station components, experiments, and other objects in place. The payload bay also holds the space shuttle's remote manipulating system (RMS), KU-band antenna, and several cameras and lights. The space shuttle is capable of carrying about 65,000 pounds of cargo in the payload bay.
Why is liquid oxygen used in space shuttle engines?
Liquid Nitrogen is used in a Space Shuttle to cool down the Space Shuttle Main Engine's (SSME) Main Combustion Chamber (MCC) because the temperatures experienced during lift exceed 3,315 degrees Celcius or 6,000 degrees Fahrenheit. If Liquid Nitrogen was not used the SSME would warp in shape and melt.
Why does NASA have to insulate the external fuel tanks of the space shuttle?
The fuel inside is super cool. The insulation slows the temps from raising too fast and the fuel evaporating
Is mica used on the space shuttle?
Oh, dude, mica is actually used on the space shuttle. Yeah, it's like this heat-resistant material that can handle the extreme temperatures up there. So, like, next time you see a space shuttle, just know it's got some mica hanging out on it, keeping things cool.
What was a cool event in the 1960's?
The moon landing and Woodstock.
Why do space marines cool?
space marines cool because they hot before now they cool.
Is the space needle cool?
Whether the Space Needle is cool, or not, is purely a matter of personal opinion.
