Two types of curved mirrors are: concave and convex.
They can be used in stores for the clerks to watch for thiefsIn cars as side mirrors to prevent accidents in blind spotI could only think of two but I hope they help!!
The object that uses two mirrors to see overhead is a periscope. Periscopes are commonly used in submarines and some types of military equipment, allowing users to observe objects from a concealed position by reflecting light through angled mirrors. The setup enables a person to see above the water's surface or around obstacles without being directly exposed.
An incline is a ramp or gentle slope. Inclined mirrors are two or more facing mirrors that are not both perpendicular to each other in two directions. For example, if two mirrors were on opposite walls of room, then one edge of one mirror were twisted (lifting the bottom off the wall or the right side), then the mirrors would be inclined from each other.
An instrument with two lenses that helps bring distant objects closer is called a telescope. Telescopes use a combination of lenses or mirrors to collect and focus light, allowing for the observation of far-away celestial bodies. They come in various types, including refracting telescopes, which use lenses, and reflecting telescopes, which use mirrors.
1. in shaving mirrors 2.in the cars
The most curved mirrors are spherical mirrors. The centre of curved surface is called center of curvature. There are two kinds of spherical mirrors. Concave and convex mirror.
The two types of curved mirrors are concave and convex mirrors. Concave mirrors curve inward and can create both real and virtual images, while convex mirrors curve outward and only produce virtual images.
There are two main types of curved mirrors: concave and convex. Concave mirrors curve inward, causing light rays to converge at a focal point, used in reflecting telescopes and shaving mirrors. Convex mirrors curve outward, causing light rays to diverge, commonly used in security mirrors and side-view mirrors.
The convex mirrors produces the diverging rays. I hope this would be enough.
There are usually two to three mirrors in a scanner and they are slightly curved so to reflect the image onto a smaller surface.
There are usually two to three mirrors in a scanner and they are slightly curved so to reflect the image onto a smaller surface.
straight and curved
Reflecting TelescopeA reflecting telescope uses a lens and two mirrors. The lens is positioned at the eyepiece, and thus the focus, which the two mirrors generated by specifically redirected light. There are two types of reflecting telescopes with one lens and two mirrors, the Newtonian Focus and the Cassegrain Focus.
the two types are straight and curved... I think :s look on the internet
There are various types of mirrors, including plane mirrors (flat and smooth), concave mirrors (curve inward), convex mirrors (curve outward), and two-way mirrors (reflective on one side and transparent on the other). Mirrors can serve different purposes, such as reflection, magnification, or focusing light.
The optical effect created by two mirrors facing each other is called an "infinity mirror."
Each vehicle must typically be equipped with at least two mirrors: a rearview mirror and two side mirrors. This configuration helps ensure adequate visibility to the rear and sides of the vehicle, enhancing safety while driving. Some states or specific vehicle types may have additional requirements, but the standard is two mirrors.