Water droplets form on the mirror when positioned over the pot due to condensation. As steam rises from the boiling water in the pot, it cools upon contact with the cooler surface of the mirror. This cooling causes the water vapor to lose energy and transition into liquid droplets, which appear on the mirror's surface. The process is a common demonstration of the principles of condensation and temperature differences.
Small droplets of water form on the mirror during a shower due to condensation. The warm, humid air from the hot water rises and comes into contact with the cooler surface of the mirror, causing the moisture in the air to cool and condense into tiny water droplets. This process is similar to how dew forms on grass in the morning.
When the warm water vapor in the air comes into contact with the cool surface of the mirror, it loses heat energy. As a result, the water vapor cools down and changes from a gas to a liquid, forming tiny water droplets on the mirror. This process is called condensation.
When you breathe out on a mirror, the warm water vapor in your breath comes into contact with the cool surface of the mirror. This temperature difference causes the water vapor to condense into tiny water droplets, creating the foggy effect on the mirror.
Water vapor condenses on a mirror because the mirror’s surface is cooler than the surrounding air, causing the water vapor in the air to lose heat and transform into liquid droplets on the mirror's surface. This happens due to the process of condensation, where the water vapor transitions from a gas to a liquid state.
Floating water droplets are called mist or spray. They are tiny droplets of water suspended in the air.
The decrease in water volume in the pot during the investigation is likely due to evaporation, where water molecules escape into the air as vapor. The formation of water droplets on the mirror suggests that the vapor is condensing back into liquid when it comes into contact with the cooler surface of the mirror. This process illustrates the principles of evaporation and condensation, demonstrating how water can cycle between different states.
diffusion
Small droplets of water form on the mirror during a shower due to condensation. The warm, humid air from the hot water rises and comes into contact with the cooler surface of the mirror, causing the moisture in the air to cool and condense into tiny water droplets. This process is similar to how dew forms on grass in the morning.
Where water condenis and froms water fapor eg after a shower there might be water droplets on the mirror
The hot heat from the hot water turns evaporates. Once it reaches or touches a cool surface (mirror), the heat would condense and turn into water droplets. Therefore, water droplets are found in the mirror when you bath.
When water vapor touches a mirror, it condenses into liquid water due to the temperature difference between the vapor and the mirror surface. This condensation creates a thin film of water droplets on the mirror's surface, causing it to appear foggy or misty.
You will see water droplets forming on the mirrorthe mirror steams up and forms condensation on it and becomes misty. when it cools down it forms water droplets.the water particles from you mouth/lungs are exhaled from your mouth and stick to the new surface, the mirror. if you notice, it happens with everything, even wood, just not as noticable.condensation the water droplets in your breath attach to the mirror and fog it
the clearity of our image in a mirror depends on the intensity of light falling on it and striking back our eyes . but when there are water droplets on the mirrror light rays have to pass through the droplets to reach the mirror surface .when passing through the water layer soome percentage of rays just gets reflcted from the water surface and some suffer total internal reflection .the rest which reach the mirror surface gets mixed with the ones mentioned earlier and creating the so called shabby image.
This usually happens after a hot or warm shower because the water vapour in the air becomes a liquid again. It condenses on your mirror. Condensation is taking place!
When steam condenses onto a cold mirror, the water vapor in the steam loses energy to the cold surface of the mirror. This causes the water vapor to change phase from gas to liquid, forming water droplets on the mirror's surface.
Water molecules in the air condense onto the surface of the mirror due to a decrease in temperature, forming tiny droplets. The droplets accumulate and spread on the mirror surface due to gravity and surface tension, forming a thin film of water. Over time, the water evaporates back into the air as the temperature increases, completing the cycle.
The water on a mirror usually comes from condensation, where moisture in the air comes into contact with the mirror's cool surface and forms tiny water droplets. This often happens when warm, humid air from a shower or a nearby source meets the cooler mirror surface.