balloon stay up because of the air inside it. to make the balloon stay up the air should be light. inside the balloons you can find the air we called helium. helium is a light air that makes the balloon stay up. that's why if you blow the balloon it wont float because the air that comes from your mouth is not helium but carbon dioxide and carbon dioxide is heavier compared to helium so it wont float.
A hot air balloon stays up because hot air is less dense than cold air. When the air inside the balloon is heated by the burner, it becomes lighter and causes the balloon to float upwards. By controlling the temperature inside the balloon, the pilot can control the altitude.
A hot air balloon goes up when the air inside the balloon is heated, causing it to become less dense than the surrounding air. This creates lift. To descend, the air inside the balloon is allowed to cool, increasing its density, which causes the balloon to lower.
A gore on a hot air balloon is a section of lightweight fabric that makes one of the panels of the balloon. The gores are cut from flat material and stitched together to give the balloon its shape.
The entire balloon is called the Envelope and makes up the top part of the hot air balloon. The deflation Port is located at the very top of the envelope and allow the operator to release the hot air in the balloon to decrease the balloon's buoyancy and make it sink.
Air expands when it is heated. This makes it less dense than colder air. Hence, it has buoyancy, and tends to rise. If it is trapped in a balloon, it can take the balloon up with it, along with things attached to the balloon, as long as the buoyancy of the balloon exceeds the attached weight.
The hot air, inside of it is very light and makes the balloon rise up.
As long as they have flue to heat the balloon.
p ballon
When you heat up a balloon in the oven, the air inside the balloon expands because the molecules have more energy, causing the balloon to inflate. If the temperature gets too high, the balloon may burst due to the increased pressure from the expanding air inside. It is not recommended to heat up a balloon in the oven as it can be dangerous.
A hot air balloon stays up because hot air is less dense than cold air. When the air inside the balloon is heated by the burner, it becomes lighter and causes the balloon to float upwards. By controlling the temperature inside the balloon, the pilot can control the altitude.
A hot air balloon goes up when the air inside the balloon is heated, causing it to become less dense than the surrounding air. This creates lift. To descend, the air inside the balloon is allowed to cool, increasing its density, which causes the balloon to lower.
a hot air balloon works when the hot air blowing from the bottom pushes up the balloon which lifts it up into the sky where it moves in the direction where the wind blows .
The upthrust exerted by surrounding air on the balloon.
A gore on a hot air balloon is a section of lightweight fabric that makes one of the panels of the balloon. The gores are cut from flat material and stitched together to give the balloon its shape.
I'm not very sure but I think thatthe balloon waiting to be blown up would be stronger, because inflated balloons can often pop easily.
If you gradually heat a balloon, then the gas inside the balloon will expand, causing the balloon to become bigger in volume.If you put a balloon above a flame, then the balloon will pop because the heat will weaken bonds in the polymer that makes up the balloon, thus the polymer will not be able to hold the pressure of the gas inside the balloon.
An increase in temperature makes the air molecules inside a balloon move faster and spread out, increasing pressure and causing the balloon to expand. Conversely, a decrease in temperature will cause the air molecules inside the balloon to slow down and contract, causing the balloon to deflate.