If it has helium, it will rise up into the atmosphere until the rubber breaks down or the helium is no longer lighter than the air around it. It may burst if the outside pressure is too low. And sunlight will increase the breakdown of the rubber or latex.
Hot air balloons work by heating the air inside the balloon with a burner, which causes the balloon to become buoyant and lift off the ground. The hot air inside the balloon is lighter than the cooler air outside, creating a pressure difference that allows the balloon to float. By controlling the temperature of the air inside the balloon, the pilot can ascend or descend to navigate the balloon.
One way to put glitter in a balloon without letting the air out is to use a funnel. Insert the funnel into the neck of the balloon and carefully pour the glitter inside. This will prevent air from escaping while filling the balloon with glitter.
To keep a Hot air balloon in the sky indefinitely you must keep all the air sealed and warm. The Hot air's lower density will keep it above the more dense, colder air. To demonstrate this put air inside a bottle and place it on-top of water. Notice how it stays "afloat". ======================================================== To keep a hot air balloon aloft indefinitely, the temperature of the air inside the balloon must be hot enough so that the difference in weight of the air inside the balance and an equivaletnt volume outside of the balloon equals or exceeds the total weight of the balloon and passengers. It doesn have to be air tight. Hot air balloons are open on the bottom. But it has to be air tight enough that the burner will be capable of keeping the air hot enough to maintain altitude.
using hot air. Whether in a liquid or in air or a specific gas, everything has a force pushing it up that is equal to the weight of the liquid or gas that the thing displaces. For example, if you put a cube measuring one cubic foot into water, the water would exert on the cube an upward force equal to the weight of a cubic foot of water, which is 62.4 pounds for pure water. While that cube is out of the water, the air exerts an upward force on the cube equal to the weight of a cubic foot of air at sea level. To get a hot air balloon off the ground, the air inside the balloon is expanded by heating until the combined weight of the expanded air, the balloon itself, and everything hanging below it is less than the weight of the same volume of the cooler air outside the balloon.
Hot air is less dense than cold air, so when the air inside the balloon is heated, it becomes lighter and therefore rises. As the balloon rises, the surrounding colder air cools it down again, causing it to sink if the heat source is turned off.
it pops
The air inside expands.
The air inside the balloon will contract, so the balloon will tend to look slightly crinkled.
When you put a balloon in hot water, the air inside the balloon will heat up and expand, causing the balloon to inflate and possibly burst due to the pressure buildup. The heat causes the air molecules inside the balloon to move faster and spread out, increasing the volume of the air inside the balloon.
The pressure outside the balloon doesn't change when the balloon rises. By a balloon rising, I assume that air is being placed into the balloon. As the balloon fills with air, the pressure inside the balloon will increase. Since the balloon can stretch, the increasing pressure against its inner walls will cause it to rise, or more correctly put, expand. Eventually, the balloon will be stretched to its fullest capacity if more air is placed inside it. When it pops, the bang you hear is the high pressure of the atmosphere inside the balloon equalizing with the lower pressure of the atmosphere outside the balloon.
If you wait long enough, you eventually wind up with one warm balloon and one cold one.
Yes, the mass of the balloon increases as you put in more air because air has mass. The more air you add to the balloon, the more mass it will have.
When a balloon is put in the fridge, the air pressure inside the balloon decreases causing it to shrink and deflate slightly. This is due to the cooler temperature causing the air molecules inside the balloon to contract.
In hot air, particles are moving faster due to the increase in heat. This makes hot air lighter than cold air so the hot air will rise. When you put hot air into a balloon, the hot air will try and rise to the top. This allows the balloon to float in the air. Eventually the air will cool and sink back down which is why it's important to continuously pump hot air into the balloon to keep it up. Hope this helps! :)
Because hot air rises, the warmest air in the balloon is at the top of it. As time passes the balloonist has to fire the burners to maintain the temperature of the air in the balloon, and to prevent it being squeezed put by the higher pressure of the cold air surrounding the balloon.
The balloon will shrink or deflate as the increased pressure compresses the air inside it. This is because the volume of the balloon decreases as the pressure around it increases.
When you put a balloon in a hot car, the air inside the balloon heats up and expands due to the increased temperature. This can cause the balloon to inflate beyond its capacity, potentially leading to it popping. Additionally, the heat can also weaken the material of the balloon, making it more susceptible to bursting. Overall, the combination of heat and expanded air increases the risk of the balloon failing.