answersLogoWhite

0

A device that ignites the fuel & oxidizer mixture in the rocket engine when a "burn" is to begin.

it lights the rocket.

User Avatar

Wiki User

7y ago

What else can I help you with?

Continue Learning about Astronomy

What are the three basic parts of a rocket?

The three basic parts of a rocket are the rocket engine, which provides thrust for liftoff, the propellant tanks, which store the fuel and oxidizer, and the payload, which is the cargo the rocket is carrying into space.


What needs To burn fuel in rocket?

You need a fuel. You need something that will react or "burn" with it. This is called an oxidizer, even though oxygen is not always what is used. You need a means of forcing the fuel into a combustion chamber. You need a combustion chamber. And you need an exhaust bell for the spent fuel to leave! Some rockets need an igniter, something to set the fuel and oxidizer off. Other rockets use "hypergolic" fuels, which means that the fuel and oxidizer go off just by coming into contact. This is good because not having an igniter means one less thing that can go wrong. The lunar module had this kind of engine. Solid rockets have the fuel and oxidizer mixed together, just waiting to be ignited. The burning fuel hollows the rocket out, forming a sort of combustion chamber.


What are the different parts of a rocket?

Space Shuttles have over six million component parts so I'll just name the most familiar part names for you. The Orbiter Rocket Systems 2x Solid Rocket Boosters Three Main Engines Heat Shield Tiles Robotic Arm That's about it.


What was a rocket that came before the mercury rocket?

The rocket that came before the Mercury rocket was the Redstone rocket. The Redstone rocket was used for suborbital flights before the Mercury program began.


During a rocket launch whioch is greater thrust of the rocket engine or weight of the rocket?

During a rocket launch, the thrust of the rocket engine is greater than the weight of the rocket. This is necessary for the rocket to overcome Earth's gravitational pull and lift off into space. The thrust generated pushes the rocket upwards while gravity pulls it down.

Related Questions

What is the purpose of a igniter in a model rocket?

I have the same question.


How the igniter works to set off the model rocket engine?

The typical igniter is a very thin piece of wire with a blob of pyrogen on the centre.


How do they put a rocket motor into a rocket?

If you have a standard kit, the motor goes in the tube at the bottom so that the end of the motor with a clay nozzle sticks out. Place an igniter in the motor and (if you are using Estes or Quest motors) put the plug ontop of the igniter and push it in. Turn the rocket upright and put it on the pad. If you don't have a rocket with a motor mount meant for this than don't try it.


How to make rocket igniters?

what are some reliable ways to make an electronic igniter, for my rocket engines that i have made using, potassium nitrate, sulpher, and charcoal.


What is a igniter used for?

An igniter is used to start fires or ignite fuel in a controlled manner. It is commonly used in devices such as gas stoves, grills, and fireworks to initiate combustion and create heat or light.


What are the three basic parts of a rocket?

The three basic parts of a rocket are the rocket engine, which provides thrust for liftoff, the propellant tanks, which store the fuel and oxidizer, and the payload, which is the cargo the rocket is carrying into space.


How do you set off a model rocket without a launch set?

To set off a model rocket without a launch set, you can use a simple electrical ignition system. Connect a pair of wires to the rocket's igniter, which can be made from a safety fuse or a small electrical match. Then, use a battery or a power source to create a circuit and ignite the igniter. Ensure you're at a safe distance and follow all safety precautions when launching.


How to light a C6-5 rocket motor?

To light a C6-5 rocket motor, first ensure the rocket is securely placed on a launch pad and that all safety precautions are taken. Connect the igniter to the motor, ensuring it is properly seated in the nozzle. Use a launch controller to send an electrical current through the igniter, which will ignite the propellant. Always follow manufacturer instructions and safety guidelines while launching.


Why is the igniter not working on my gas stove?

The igniter on your gas stove may not be working due to a faulty igniter component, a clogged igniter port, or a disconnected igniter wire. It is important to troubleshoot and potentially replace the igniter to restore functionality to your gas stove.


Why is my gas stove igniter not sparking?

Your gas stove igniter may not be sparking due to a faulty igniter, a clogged igniter electrode, or a problem with the gas supply. It is important to troubleshoot and potentially replace the igniter to resolve the issue.


were is the igniter on my maytag range?

were is the igniter on my maytag range


Why is the igniter on my gas stove not working?

The igniter on your gas stove may not be working due to a faulty igniter component, a clogged igniter port, or a disconnected power source. It is important to troubleshoot and potentially replace the igniter to restore functionality to your gas stove.