The diameter of a sphere is the longest path through the centre from one side to another. In a Jovial planet like Jupiter, Saturn, Uranus or Neptune though, the atmospheres are so thick that people may talk about an 'effective diameter' which includes their atmosphere, because it would be so inaccurate to estimate where the actual surface is, and give the propper diameter.
2½ Moon Diameter = Earth's Diameter- 1 Moon Diameter. Earth's Diameter = 7/2 Moon
The diameter of the Moon is 0.273 times the diameter of the Earth.The diameter of the Sun is 109 times the diameter of the Earth. So:109/0.273=399.27The diameter of the Moon is almost 400 times smaller than the diameter of the Sun.Pwnt, idk u tell me?
the sun's diameter is about 110 times greater than the diameter of our earth.
The Sun's diameter is about 108 times the size of Earth's. (The Sun has a diameter of about 865,000 miles compared to Earth at 8000 miles.)
Mercury's diameter is 4879km.
Effective diameter = Barrel Diameter - (Average pass height + Roll Gap) Average pass height = Area/pass width
it is the clear cover for stirrups. effective cover of the reinforcement = nominal cover+ diameter of stirrups+half diameter of main bars
the difference between the min and max effective of your two threads will tell you if there going to clash on assembly
2.5 inch bsp thread o.D
The largest optical telescope in the world today is the Gran Telescopio Canarias (Grand Canary Telescope) in Spain, with an effective diameter of 10.4 meters. The world's largest individual radio telescope is the RATAN-600 in Russia, with the effective diameter of a 600 meter dish.
Oh, dude, the effective diameter of a screw thread is basically the imaginary diameter that represents the size of the thread where the width of the thread and the depth of the thread are equal. It's like the Goldilocks of diameters, not too big, not too small, just right for threading stuff together. So, yeah, that's the effective diameter for ya.
Holes for blasting vary in size from an inch to several inches depending on the application. Depth will vary across applications as well. The effective diameter of a blast will depend on the size of the charge, the depth in which it is placed and the type of material that is being blasted. And all of this will vary as widely as the application. In commercial mining applications, it is unusual to make a single hole and pack a single charge to make a shot. This ups the challenge to estimate the amount of material that will be displaced, but the professionals who do this blasting can make these estimates.
No, the aperture of a spherical mirror is not necessarily equal to its diameter. The aperture refers to the effective opening through which light can enter and be reflected by the mirror, which can be smaller than the overall diameter of the mirror. In many cases, the aperture is defined by the area of the mirror that is used for focusing light, while the diameter is simply the total width across the mirror.
2.5 ohm
If you mean the diameter of a circle with area pi, then the diameter is 2. If you mean the diameter of a circle with circumference pi, then the diameter is 2. If you mean the diameter of a circle with diameter pi, then the diameter is pi. If you mean the diameter of a circle with radius pi, then the diameter is 2pi.
nominal diameter is the original diameter of an object
overall tire diameter is the determining factor to braking ability. the bigger the tire the less effective the braking.