23.3°F
At 90,000 feet in altitude, the temperature is approximately -94 degrees Fahrenheit (-70 degrees Celsius). This high up in the atmosphere, temperatures are extremely cold due to the thin air and lack of insulation.
8,000 feet into the atmosphere
Every 10 meters, the pressure will increase by one atmosphere. That is about 33 feet.
On average, the temperature of the atmosphere at 10 km above the Earth's surface is around -50 degrees Celsius. This part of the atmosphere is known as the tropopause, which marks the boundary between the troposphere below and the stratosphere above.
Hot air balloons can travel in the troposphere, which is the lowest layer of Earth's atmosphere. They typically fly at altitudes ranging from a few hundred feet to a few thousand feet above the ground.
thousand standard cubic feet
The formula is: Normal Cubic Feet = SCF * [T / (273 + 15.6)] * [ 14.73 / P] SCF = Standard Cubic Feet T = Temperature in kelvin P = Pressure in psi (absolute pressure, where 1 atmosphere = 14.73)
The rate of temperature change per 1000 feet in the atmosphere is called the lapse rate. On average, the lapse rate is about 3.5F per 1000 feet of elevation.
342,061 feet.
On a standard day, the temperature at 40,000 feet is approximately -69.7F.
To convert a thousand standard cubic feet to million cubic meters, you would first convert standard cubic feet to cubic meters by dividing by 35.3147. Then, divide the result by 1,000 to convert cubic meters to million cubic meters.
SCFH stands for Standard Cubic Feet per Hour, and it is a common unit of measurement for the flow rate of gases, such as air. It represents the volume of air (or gas) that flows through a system in one hour under standard conditions of temperature and pressure.
M stands for a thousand. and CF - cubic feet. MCF - thousand cubic feet, thus MMCF - thousand of thousand cubic feet which is just million cubic feet
On average, the temperature drops approximately 3.5°F for every 1,000 feet increase in elevation. This phenomenon is known as the environmental lapse rate and is a key factor in understanding how temperature changes with altitude in the atmosphere.
None. The milipede has a lot of feet, but not one thousand.
At 90,000 feet in altitude, the temperature is approximately -94 degrees Fahrenheit (-70 degrees Celsius). This high up in the atmosphere, temperatures are extremely cold due to the thin air and lack of insulation.
CO levels are not measured in feet and so you will not find such standard feet anywhere.CO levels are not measured in feet and so you will not find such standard feet anywhere.CO levels are not measured in feet and so you will not find such standard feet anywhere.CO levels are not measured in feet and so you will not find such standard feet anywhere.