The azimuth degrees of Orion's Belt can vary depending on your location and the time of year. On average, Orion's Belt is typically located around 180-200 degrees azimuth when viewed from the northern hemisphere. You can use a sky mapping app or software to determine the exact azimuth for your specific location and time.
Probably, you can. :)
As of 2021, Betelgeuse has an azimuth of around 225 degrees and an altitude of about 27 degrees when observed from the northern hemisphere. These values will change throughout the night and over the course of the year due to the Earth's rotation and orbit.
The point on the horizon that is due west has an altitude of zero and an azimuth of 270 degrees.
An object seen halfway between the horizon and the zenith has an altitude of 45 degrees.An object seen due east of the observer has an azimuth of 90 degrees.
Orion's Belt is not a physical object but rather a prominent asterism in the constellation Orion. The stars that make up Orion's Belt are estimated to be around 10 million years old.
The back azimuth is the direction opposite to a given azimuth, measured in degrees. To calculate the back azimuth of 118 degrees, you add 180 degrees. Since 118 + 180 = 298 degrees, the back azimuth of 118 degrees is 298 degrees.
The back azimuth is the direction opposite to a given azimuth. To calculate the back azimuth of 179 degrees, you would add 180 degrees. Since 179 + 180 equals 359 degrees, the back azimuth of 179 degrees is 359 degrees.
To convert a magnetic azimuth to grid azimuth, subtract G-M angle.” If you have a magnetic azimuth of 270 degrees, and the G-M angle is 8 degrees, your grid azimuth will be 262 degrees.
Rigel
A BACK AZIMUTH IS A PROJECTION OF THE AZIMUTH FROM THE ORIGIN TO THE OPPOSITE SIDE OF THE AZIMUTH CIRCLE. i.e. THERE ARE 360 DEGREES IN AN AZIMUTH CIRCLE, THUS THE OPPOSITE DIRECTION IS 180 DEGREES.
No.
Probably, you can. :)
Orions belt?
The back azimuth is the direction opposite to a given azimuth. To find the back azimuth of 245 degrees, you add 180 degrees to it. Thus, 245 + 180 = 425 degrees. Since azimuths are typically measured within a 0 to 360-degree range, you subtract 360 from 425, resulting in a back azimuth of 65 degrees.
degrees
If it is greater than 180, subtract 180 (270 degrees - 180 = 90 Degrees). If it is less than 180, add 180 (40 Degrees + 180 = 220 Degrees) Now the question is, what is the formula that will do this in MS Excel?
As the request is for the back azimuth, then what is wanted is the reverse (or inverse) of the azimuth, 223 degrees. In other words, an object moved in the direction of 223 degrees (Southwest relatively), but now the desire is to reverse the travel in order to arrive at the starting point. (That starting point would have to be Northeast relatively.) One does not typically work with directions exceeding 360 degrees nor less than 0 degrees as that range is the range of a compass. Therefore, the back azimuth of 223 degrees, whatever it is, must be between zero and 360 degrees. To determine the back azimuth all that is necessary is the knowledge that 1) the back azimuth is the opposite direction of the azimuth and 2) 180 degrees either added or subtracted will yield the back azimuth, and 3) the correct back azimuth must be in the range of zero to 360 degrees. Given this knowledge and the variable definitions Ab = Back Azimuth and A = Azimuth, Ab = A + 180 or Ab = A - 180 But which equation yields the correct back azimuth? Using knowledge point #3 above, the correct result will be the one that is between zero and 360 degrees. Therefore, Ab = A - 180 = 223 - 180 = 43 degrees is the correct back azimuth. The other choice, Ab = A + 180 = 223 + 180 = 403 degrees, exceeds the range of the compass, so 403 degrees cannot be the correct back azimuth.