answersLogoWhite

0

low

User Avatar

Wiki User

11y ago

What else can I help you with?

Continue Learning about Astronomy

What is the magnification of the eyepiece on a microscope?

To determine the magnification of the eyepiece on a microscope take the total magnification for the microscope and divide it by the total magnification of the objective lens. The answer is what the magnification is for the eyepiece.


How do you detect the brightest point in an image using opencv?

You can detect the brightest point in an image using the minMaxLoc function in OpenCV. This function will return the minimum and maximum pixel intensity values, as well as the coordinates of the minimum and maximum values. By retrieving the coordinates of the maximum value, you can locate the brightest point in the image.


What is the function of ocular?

The function of the ocular (eyepiece) is to magnify the image produced by the objective lens in a microscope or telescope, allowing the user to see the image more clearly. It typically provides a fixed magnification power for the device.


What is the total magnification of the swift compound microscope when viewing an image under the lowest power objective?

The total magnification of a compound microscope is calculated by multiplying the magnification of the ocular lens (usually 10x) with the magnification of the objective lens. If the lowest power objective has a magnification of 4x, then the total magnification would be 40x (10x * 4x).


On the microscope what is the lenses that enlarge an image?

The lenses that enlarge an image on a microscope are called objective lenses. These lenses come in various magnification powers, typically ranging from low to high (e.g., 4x, 10x, 40x, 100x). The total magnification is determined by multiplying the magnification of the objective lens by the magnification of the eyepiece or ocular lens. Together, they allow for detailed observation of small specimens.

Related Questions

Magnification and resolution as they pertain to a microscope?

Magnification lets you see an image larger than it is. But resolution makes the image clearer when magnified.


A change in the size of an image compared with the size of an object?

The change in size of an image compared with the size of an object is termed magnification. This can be calculated as the ratio of the size of the image to the size of the object. Magnification can be expressed as magnification = image size / object size.


What is the magnification of the eyepiece on a microscope?

To determine the magnification of the eyepiece on a microscope take the total magnification for the microscope and divide it by the total magnification of the objective lens. The answer is what the magnification is for the eyepiece.


What do positive and negative sign of magnification indicate?

Positive would be more magnification, and negative would be less magnification. * * * * * No. M > 1 indicates that the image is bigger than the pre-image (and on the same side of the centre of magnification); 0 < M < 1 indicates that the image is smaller than the pre-image (and on the same side of the centre of magnification); -1 < M < 0 indicates that the image is smaller than the pre-image (and on the opposite side of the centre of magnification); M < -1 indicates that the image is larger than the pre-image (and on the opposite side of the centre of magnification). M = 0 means the image is point-sized and at the centre of magnification. M = 1 means the image coincides with the pre-image. M = -1 means that the image is the same size as the pre-image and on the opposite side.


What is the differences between magnification and resolution and how do they each contribute to the image that you see with the microscope?

Magnification refers to how much larger an object appears compared to its actual size. Resolution, on the other hand, is the ability to distinguish between two separate points. Magnification enlarges the image, while resolution determines how clear and detailed the enlarged image appears. Both magnification and resolution contribute to the overall quality and clarity of the image seen through a microscope.


What is the magnification of a virtual image if the image is 60.0 cm from a mirror and the objects is 15.0 cm from the mirror?

The magnification of the virtual image is 4.0. This is calculated by dividing the image distance by the object distance: 60 cm (image distance) / 15 cm (object distance) = 4.0 magnification.


How does increasing the magnification in the microscope change what you see?

Magnification relates to how large you can see an object - making small items larger than they normally appear. Resolution relates to the amount of detail you can see in the object or image. The higher the resolution, the more detail that is visible.


What does negative sign if the value of magnification of a mirror indicate?

It means that the pre-image and image are on opposite sides of the centre of magnification.


How can magnification be used to see cells more clearly?

Magnification can be used to see cells more clearly by enlarging the image of the cells, making their details easier to observe. This is achieved by using a microscope with lenses that magnify the image of the cells, allowing for a closer and more detailed view of their structures.


What is the Magnification equation for concave mirror?

The magnification equation for a concave mirror is given by the formula: M = - (image distance) / (object distance), where M is the magnification, image distance is the distance from the mirror to the image, and object distance is the distance from the mirror to the object. Negative magnification indicates an inverted image.


Why are today microscope called compound scopes?

Because the magnification of image = magnification of eyes piece * magnification of lens.


How to find the magnification of a lens?

To find the magnification of a lens, you can use the formula: Magnification image height / object height. This formula compares the size of the image produced by the lens to the size of the original object. The magnification value will tell you how much larger or smaller the image appears compared to the object.