answersLogoWhite

0

Step 1: Get the Edges Bound

Measure and cut a piece of carpet to the appropriate length. Because it requires specialized sewing equipment and knowledge, have the edges bound by a professional.

Step 2: Mark the Runner Location

Mark the location on each step where the runner will rest. Make an inside mark to show where the edges of the padding will extend and an outside mark to show how far the carpet will extend.

Step 3: Install the Padding

Cut a piece of padding to fit on each step. Lay each piece in place, and secure it with a hammer stapler.

Step 4: Position the Carpet Runner

Roll up the carpet, and lay it a few steps above the bottom. Then pull the end toward the bottom. You'll need some slack to work with so that you don't tug too hard on the bottom and cause the entire roll to fall down on you. Keep the roll centered as you work your way up the stairs.

Step 5: Staple the Bottom

Run a row of staples along the bottom of the bottom riser where the carpet meets the floor. Gently wiggle the head of the staple in between the fibers of the carpet to hide the staples. Because the staples are in the corner between the riser and the tread they should stay well hidden.

Step 6: Staple the Carpet to the Riser

Pull the carpet tight, and run a row of staples along the top of the riser where it meets the tread of the stair.

Step 7: Pull the Carpet Tight

Use the knee kicker to pull the carpet tight as you place another row of staples in the corner between the riser and the tread.

Step 8: Push the Carpet into the Corner

Use the stair tool to wedge the carpet into the corner between the tread and the riser.

Step 9: Repeat the Process

Repeat the process starting at step 5 as you work your way up the stairs. End the process at the corner between the top tread and the last riser to the floor above. After stapling the carpet to the last tread, use a carpet knife to trim any excess carpet.

To install a carpet runner you need the following: the runner, an underlay, retaining bars and nails. First, nail the underlay on the stairs where the runner is going to be. Second, place the runner. Third, fix retaining bars at the top and bottom of the stairs and on every step.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

How to Install a Carpet Runner?

A carpet runner can brighten up your home when placed in a strategic location such as a hallway, entry way or stair case. Installing a carpet runner can be simple provided that you have the correct tools and know how. To properly install a carper runner, you will need carpet padding, a razor blade, hammer gun/staple gun, straight edge, ruler, pad tape and for stair installations, an electric staple gun.1.) The first step in installing a carpet runner is to measure the area of the installation and map out the placement of the runner, using your straight edge as a guide. This will help to ensure that the carpet runner will be placed in its desired location.2.) Once the measurements have been completed and the placement has been mapped out, deduct an inch from the length and width of your measurements and use your razor blade to cut the carpet pad to that size.*Note: if you are installing your carpet runner on steps, the pad should only go on the tread of the steps, not the riser. Measure your pad to come out to the edge of the nose and a 1/2 gap should be left at the crotch of the step for stapling.3.) If there are any seams in your cut to size carpet pad, join them with pad tape.4.) Using your hammer gun/staple gun, secure the carpet pad in place, ensuring that the pad stays straight and that there is a half inch gap between the edge of the carpet pad and where the edge of your carpet runner will lay.5.) Roll the carpet runner out on top of your carpet pad, ensuring that it remains straight and centered.**If this is a hallway or entry way application, you are done!6.) If you are installing a carpet runner on stairs, you will now need to staple the carpet runner to the stairs with an electric staple gun. Staple the carpet to the nose and crotch of the stairs, ensuring that the carpet remains tight against the stairs.7.) Enjoy the beauty your new carpet runner has brought to your home!


What are synonyms of carpet?

Matting, rug, runner...


How wide should a carpet runner be?

The standard carpet runner is generally 26" to 27" wide. Although often in wide hallways or in commercial settings they can be wider.


How can I effectively secure a carpet to the floor using carpet tape?

To effectively secure a carpet to the floor using carpet tape, first clean the floor and remove any debris. Then, apply the carpet tape along the edges and seams of the carpet, pressing firmly to ensure a strong bond. Finally, smooth the carpet down onto the tape to secure it in place.


What are the best ways to keep a hallway runner from slipping?

The best way to keep a hallway runner from slipping is to use carpet pads or carpet grips. These products are known to provide prevention against hallway runner from slipping.


Where might one find a stair carpet runner?

There are many places where someone can find a stair carpet runner. Some of those places include Carpet Tone, Walmart, and Home Depot. Theirs are affordable and durable.


How do you install carpet on stairs?

Installing carpet on wooden stairs by yourself: Step 1: Install Tackless Strips. Step 2: Install the Padding. Step 3: Trim Carpet to Size. Step 4: Crease the Carpet Runner. Step 5: Position and Attach the Runner. Step 6: Staple the Riser. Step 7: Tuck the Carpet Into the Corner. Step 8: Straighten the Runner's Edges.


Where can one purchase a runner carpet?

If you want to purchase a runner carpet for your home, you can purchase one from Overstock, Amazon, eBay, Walmart, Macy's, Target, Pier 1 Importers, and Home Depot.


Carpet Runner for Beauty and Safety?

Carpet runners are very much a necessity for the home. They can be used on the floors as well as on the stairs. A very practical use for the carpet runner is right in front of the door that comes in from the outside. Having this runner will protect the rest of the wood floor or carpeting from any dirt or grime brought in from the outdoors. Anyone coming into the home can then remove his shoes, or wipe them on the runner, before entering the house. If there is a pet involved, his paws can be cleaned off before bringing in all of the nasty things that pet paws can bring in. The carpet runner doesn’t have to be just practical, it can be pretty too. There are some with designs and nice colors that won’t show the dirt. The unique carpet runner that can be put on the stairs is not only decorative and pretty, it can also be a safety feature. By covering hardwood steps with the carpet runner, falls can be prevented. The carpet runner also will keep the hardwood steps from getting dull and worn out. It also keeps them clean. Carpet runners can come in several colors and styles that go perfectly with the rest of the house and can bring out the beauty of the stairway. Businesses also have many uses for the carpet runner. A long runner will also protect the floor from customers and employees coming in from the bad weather. Many people like to purchase Persian carpet runners for their homes. These are the same as a Persian rug, except they are shaped long and narrow to make it a runner. Many times these carpet runners are handmade in the Middle Eastern countries. If the runner has fringe, it is made of cotton, and the pile is made of wool. These Persian carpet runners come in the many exotic colors and patterns as the regular Persian rugs. Some of these runners are as narrow as 2’4 wide. But they can be as long as 20 feet. There are also European carpet runners made in a very similar way using the same colors with unique patterns. Whether the choice is the exquisite carpet runner, or the more plain solid runner, it will be a fantastic addition to the home for either safety or decorative accent.


How can I effectively secure a carpet on carpet tape to prevent it from slipping or moving?

To effectively secure a carpet on carpet tape and prevent it from slipping or moving, make sure to thoroughly clean the area where the tape will be applied. Press the tape firmly onto the carpet and then firmly press the carpet onto the tape. Additionally, consider using double-sided carpet tape for extra security.


How can I effectively shrink a carpet bulge?

To effectively shrink a carpet bulge, you can try using a carpet stretcher tool to pull the carpet tight and secure it in place. This tool can help to smooth out any wrinkles or bulges in the carpet.


How do I go about installing carpet on stairs effectively and securely?

To install carpet on stairs effectively and securely, start by measuring and cutting the carpet to fit each step. Use a knee kicker and carpet stretcher to secure the carpet in place, making sure to tuck it tightly around the edges of each step. Use a carpet adhesive or tack strips to keep the carpet in place and prevent it from shifting. Finally, trim any excess carpet and secure the edges with a carpet trimmer for a professional finish.