0
What else can I help you with?
How do you convert 8 ohms to 4 ohms?
wire two 8 ohm speakers in a parallel circuit!
How much ohms does 1500 watts speaker has?
The wattage and ohms of a speaker are not related; the resistance for speakers is usually 4 or 8 ohms.
What is the best set up for two 8 ohm 1600w speakers and a 500w amplifier with outputs at 4 ohms 5.2ohms or 42 ohms?
Use 5.2 ohms, which is the closest to 8 ohms.
Are Baby Advent II speakers 8 ohm?
They are 6 ohm.
2000 dodge neon factory replacement speakers ohms?
8 ohm
How many ohms is a computer speaker?
There is no single standard. Many computer speakers are rated at 8 ohms while others are 16 ohms or higher. My computer subwoofer here is 4 ohms.
How do you figure watts for 8 Ohm speakers?
The power rating of speakers has nothing specific to do with ohms. look at the Watts rating printed somewhere on the speakers
How do you select speakers with respect to the impedance of the amplifier?
Amplifiers are rated to operate within a range of impedances. Typically, a domestic amplifier will drive a minimum impedance of 8 Ohms or 4 Ohms. Using speakers that have an impedance lower than the amplifier rating is likely to increase distortion and can damage the outputs of the amplifier if the levels are too high. Using speakers that are significantly higher than the minimum rating will not cause damage to either the amplifier or speakers but it will reduce the power that is delivered to the speakers. In most domestic systems, this limitation of the power output is not likely to be an issue. Any amplifier rated to drive into 4 Ohms will work well with speakers of between 4 and 8 Ohms. An amplifier with an 8 Ohm rating should be used only with speakers of 8 Ohms or higher.
Can you wire 2 16 ohm speakers to 16 ohms?
No. Two 16 ohm speakers connected together are either 32 ohms, if wired in series, or 8 ohms, if wired in parallel. You can, however, connect four 16 ohm speakers in series-parallel to get 16 ohms, with four times the power handling capacity of just one.
What is the resistance of four 8 ohm speakers wired in a series?
Two 8 ohm speakers in parallel is 4 ohms, and the power will be split between them. However, unless the amplifier is rated for 4 ohm operation, you will not get the same total power out of the amplifer as you would with an 8 ohm load.
Will 8 ohm speakers work with 816 ohms of impedance?
yes but will barely hear anything. If you have 816 Ohms of impedance then your speaker is probably bad.
How do i wire 2 8 ohm speakers together to stay 8 ohms?
To wire two 8-ohm speakers together while maintaining an 8-ohm total impedance, connect them in parallel. This means you should connect the positive terminals of both speakers together and the negative terminals together, then connect the paired terminals to your amplifier. The formula for calculating impedance in parallel is 1/R_total = 1/R1 + 1/R2; thus, two 8-ohm speakers in parallel result in a total impedance of 4 ohms. To stay at 8 ohms, you can wire one speaker in series with another 8-ohm speaker, resulting in a total impedance of 16 ohms or use a different configuration or additional speakers.
