0
No. If it works at all, it will be underpowered, and possibly damage the speakers.
To power 12V speakers, you have to have an adapter with EXACTLY 12V (no more, no less), and at least 1A. You could hook up a 12V 4A adapter if you wanted to, your speakers would just only draw 1A of power.
Make sure you use a 12V adapter though!!
What else can I help you with?
Can you replace 12v 1a adaptor used on device of 12v 700ma?
No, the new adapter will not be able to safely supply enough current.
Can I use 12V 1A adapter for a 12V 0.16A device?
I wouldn't recommend it ! If the device needs to draw more current than is available - the adapter could overheat, posing a fire risk.
Can 12V 1A adapter be used for 12V 2A device?
no, it may damage the appliance.1Can_12V_2A_adapter_be_used_for_12V_1A_device, 2a adapter cannot be used for 12v, 1a device if the so mentioned parameters are input parameters of the device.Yes, a 12 volt 2 amp adapter has more that enough capacity to operate a 12 volt 1 amp device. In fact the adapter can operate devices up to a limit of 12 volts 2 amps. A device larger than 2 amps connected will tend to heat the adapter up and eventually cause it to fail.
Can a 12v dc 500mA adapter be substituted for a 12v dc 200mA ac adapter?
No.If it is AC output, it will blow out the power circuits of the DC device.If it is DC output, it doesn't have enough current capacity for the load of the DC device.If you want to power a DC device with a wall wart, make sure the wart is:DC outputCorrect polarity (some have reversible polarity)Exact same voltage as the deviceGreater than or equal to current rating of the device
What is the best wifi adapter for the Nikon D3300 camera?
The best wifi adapter for the Nikon D3300 camera is the Nikon WU-1a Wireless Mobile Adapter.
What is the voltage and amps for nettalk duo power adapter?
Output: 5V 1A
Can you use a 300mA adaptor on a 1A device?
Yes, you can use a 300mA adapter on a 1A device, but it may not work properly or could damage the adapter. The device may draw more current than the adapter can provide, leading to insufficient power, potential overheating, or failure of the adapter. It's always best to use an adapter that meets or exceeds the device's current requirements for optimal performance and safety.
Can you use a 7.5v adapter 1amp instead of required 7.5v 2.1amp?
Using a 7.5V adapter rated for 1A instead of a 7.5V 2.1A adapter is not advisable. The lower amperage adapter may not provide sufficient current for the device, potentially causing it to underperform, malfunction, or overheat. Additionally, if the device attempts to draw more than 1A, it could damage the adapter or lead to instability. It's best to use an adapter that meets or exceeds the required specifications.
Can a 100 mA adapter be substituted with a 200 mA adapter?
A 9V 1A adapter will supply up to 9 Watts of power and a 9V 200mA adapter delivers up to 1.8W of power. The 200mA adaptor may not be able to supply enough power to a device that has been supplied with a 1A adapter. The 1A adaptor should operate equipment that originally used a 200mA adapter. Before using a different power supply, check that the outputs are both DC or both AC. If they are both DC, it is important to check that the polarity at the connector is the same for both. If AC and DC supplies are swapped or the polarity is swapped there is a risk that the equipment will be damaged.
What is the device called that changes voltage in DC IE 12v 1A to 5v 2A?
If it were just 12V to 5V we would be talking about a simple regulator. Since we are also talking about 1A to 2A, we are talking about some kind of inverter, perhaps a pulse width modulated power converter.
Can you use a 12V 1A sealed lead acid battery charger on a circuit that requires 12V 1A?
The battery is more likely to be marked 12 v 1 Ah, meaning 1 amp-hour, so it can supply 1 amp for an hour, or ¼ amp for 4 hours etc.
What current will flow if 12v is put across a 12ohms resistor?
V = ir i = v/r i = 12/12 i = 1a
