0
Yes, a single surround speaker can be used as a front speaker, but it may not provide an optimal listening experience. Surround speakers are typically designed for ambient sound and effects, while front speakers are meant to handle the primary audio channels, including dialogue and music. Using a single surround speaker may result in unbalanced sound and a lack of clarity in the front audio stage. For the best performance, it's recommended to use dedicated front speakers for that role.
What else can I help you with?
How do you get just front and surround speakers to play on a Denon avr-1508?
There are no surround modes that quickly turn off the subwoofer, center channel and surround back speakers, but leave the surround speakers (side) speakers on. You will need to go into the System Setup -> Sp 2. In 3.0p -> Speaker Setup menu to select Center Speaker 'None', Surround Speaker ('Large' or 'Small'), Surround Back Speaker 'None' and Subwoofer 'No'. If you have a subwoofer and want sound to come out of the all of the speakers when you are listening to a non-surround source such as a CD, use the 5CH/7CH Stereo DSP simulation.
Can the front speakers in a surround sound system be used as stand alone speakers?
Yes and no. Depends on just which front surround speaker you're talking about. If the surround speaker set you have includes a subwoofer, then for standalone you really need the front speakers plus the subwoofer, as the fronts aren't designed to reproduce the bass, but rather to send the bass to the subwoofer. So if you used ONLY the front speakers without the subwoofer, then you'll have very poor bass in the resulting system. If you use the subwoofer plus the front speakers, then it should work just fine.
My surround speaker are 8 ohms front speaker are 6 ohms the amp is set to 6 ohms What is the impact on surround speaker?
The speaker will be fine and there will be little impact on its performance. In these situations, if there is a problem, it will be with the amp because that is what delivers the electrical current to the speaker. The situation you want to avoid is having speakers with a lower impedance connected to your amplifier. So you might have had a problem if your surround speakers were 4 ohms. However, as they have a higher impedance than the amp is set for, I wouldn't worry about it.
Do they make wireless surround sound?
Yes they do make wireless surround sound. If you purchase wireless receiver box you will have speakers that are in the front (which doesn't need to be wireless since it's connected to you TV) and you have the right and left which rest behind you. The wireless receiver box connects to a power outlet and sends the single to the two rear speakers. This setup eliminates running speaker wires from the receiver to your speakers.
What are the type of speakers in surround sound?
Ideally, the system should have the same brand and model in the surround as the three front speakers .
What cables does an acousticmass 7 need and how do you hook it up?
It uses ordinary speaker cables. Unlike modern surround speaker systems, the Acoustimass 7 does not have a powered subwoofer. The only way to connect it to a surround receiver is to use the speaker level outputs from the right, center and left channels. They connect to the sub, and then on to each of the front 3 speakers. You will need to tell your receiver that there is no connected subwoofer, and that the size of the front 3 speakers is 'large'.
I have a stereo receiver with four channel speakers and a subwoofer is there a way I can have the two front channels as regular sound speakers and the two rear channels as surround affect speakers?
If the receiver is just stereo, not surround sound, you will not be able to create a surround sound (front, centre, sub, surround) setup.
What is remapping audio channels for 5.1 surround?
Remapping is sometimes offered to allow 2-channel speaker systems to play back 5.1 surround DVDs. This option remaps the rear speaker sound to the front two speakers so that sound effects, music and other rear-only sounds can be heard if you only have 2 speakers.
How do you set up surround sound in your home entertainment system?
To set up surround sound in your home entertainment system, you will need a receiver that supports surround sound, speakers (front, center, rear, and subwoofer), speaker wires, and an audio source. Connect the speakers to the receiver using the speaker wires, ensuring they are placed correctly according to the manufacturer's instructions. Connect the audio source to the receiver, and then configure the settings on the receiver to enable surround sound. Adjust the speaker levels and test the system to ensure everything is working properly.
How do I set up surround sound in my home entertainment system?
To set up surround sound in your home entertainment system, first place the speakers strategically around the room, with the center speaker in front of the TV and the rear speakers behind the seating area. Connect the speakers to the receiver using speaker wire, ensuring each speaker is correctly labeled and connected to the corresponding output on the receiver. Adjust the speaker settings on the receiver to match the layout of your room and calibrate the system for optimal sound quality.
What is bi-pole?
Bi-pole can be used to refer to a type of surround sound speaker. Bipole surround speakers have two or more speakers that output sound from both sides of the cabinet. If used as side surround speakers, the sound is output both towards the front and rear of the room. If used as rear surround speakers, they output sound in both directions along the rear wall. The dual speakers used in a bipole speaker are 'in phase', meaning that both speakers output sound simultaneously. Bipole speakers create a diffuse surround effect so the location of the speaker cannot be pinpointed. In general, bipole speakers are a good choice for movies and music and are usually placed on the side walls. (from About.com) Second, If your talking chemistry, then you probably mean di-pole. Which refers to a covalently bonded molecule having more electronegativity on one end than the other, creating two "poles" of partially positive and partially negative.
What is bi pole?
Bi-pole can be used to refer to a type of surround sound speaker. Bipole surround speakers have two or more speakers that output sound from both sides of the cabinet. If used as side surround speakers, the sound is output both towards the front and rear of the room. If used as rear surround speakers, they output sound in both directions along the rear wall. The dual speakers used in a bipole speaker are 'in phase', meaning that both speakers output sound simultaneously. Bipole speakers create a diffuse surround effect so the location of the speaker cannot be pinpointed. In general, bipole speakers are a good choice for movies and music and are usually placed on the side walls. (from About.com) Second, If your talking chemistry, then you probably mean di-pole. Which refers to a covalently bonded molecule having more electronegativity on one end than the other, creating two "poles" of partially positive and partially negative.
