0
No, you cannot send an HDMI signal through S-Video cables. HDMI and S-Video are fundamentally different technologies: HDMI transmits digital audio and video signals, while S-Video carries analog video signals. Additionally, S-Video does not have the bandwidth to support the high-definition video and audio quality that HDMI provides. To transmit HDMI signals, you need appropriate HDMI cables.
What else can I help you with?
Why would one need an HDMI splitter?
An HDMI Splitter is used to send video signals to many different devices that one may have and need to send a video signal to. If one has a computer and a television they ham use a HDMI Splitter so that they can get a video signal on the television as well as on the computer.
How do you use a wired router?
A wired router is able to spilt the Internet signal and send it down Internet cables or Ethernet cables. It is capable of sending the signal to many different computers.
Where can you purchase an HDMI extender?
An HDMI extender is a tool that is used to send a high definition digital signal from one device to another. They can be purchased online at Amazon and eBay or from electronic stores such as Best Buy and Future shop.
How are drives connected to the motherboard?
Drives are linked by cables called SATA cables, these send data through the motherboard
What is DVi and HDMI cable and how does it look?
Dvi stands for Digital Visual Interface. as the name suggests, it supports a digital signal. It looks like a long plug about 3cm wide and about a cm thick and has many pins, IT DOES NOT SEND AUDIO, you will need another plug for that. That is why its so widely used for computer monitors that do not have speakers. HDMI on the other hand, Stands for High-Definition Multimedia Interface. It too supports digital signal as well as audio signals. There are quite a few different types of HDMI and DVI cables so make sure you do you know the difference before you buy one. :)
How to increase HDMI outlets on a tv with a single outlet?
To increase HDMI outlets on a TV with a single HDMI port, you can use an HDMI switch, which allows multiple HDMI devices to connect to one port. Simply plug the HDMI switch into the TV's HDMI outlet and connect your devices to the switch. Alternatively, an HDMI splitter can be used if you want to send the same signal to multiple displays, but for different inputs, a switch is the better choice. Ensure the switch supports the HDMI version and features you need, such as 4K or HDR.
What is the best method to send and select multiple HDMI video sources to a remote TV?
HDMI selector switch from RadioShack. You can connect multiple HDMI devices to it, and select which one passes through to the HDMI cable that you connect from the device to the tv. If the tv is a good distance away from the tv, then go with an HDMI over cat5e extender.
Which of these is not a type of signal used to send information through electricity?
transistor
What is HDMI audio return channel?
It will send audio back to the receiver to eliminate needing an additional HDMI cable.
Do stereo receivers still send componet signals with a HDMI input?
No. Home theater receivers that have hdmi inputs upscale component to hdmi, but not the other way around.
What are characteristics of coaxial cables?
Coaxial cables are conductors that send an electrical signal through an inner conductor which is surrounded by a protective insulating layer and sealed by a shield. The cable itself is protected by the outside insulating layer. Coaxial cable is commonly used for video and CATV transmission. The advantage is that electromagnetic fields have less leakage outside the shield.
How do you connect a laptop with HDMI to a tv with only rca?
I'm sorry, but without special hardware - you don't. HDMI is a digital meta-data-enabled connector, while RCA is analog signal type. You would have to have a device that would take the digital information, decode it and send it off as analog to the TV.
