0
What else can I help you with?
How do you get CD player to produce 5.1?
Connect audio cables to the Audio Out on the DVD player to the Audio In connectors of the speaker system.
How do you connect a cable box to a stereo receiver?
Connect a audio cable from the Audio Out connectors on the cable box to the AUX In Audio connectors on the stereo receiver.
How can I connect a microphone to a speaker?
To connect a microphone to a speaker, you will need an audio cable with the appropriate connectors. Plug one end of the cable into the microphone and the other end into the input on the speaker. Adjust the volume levels on both the microphone and the speaker to ensure clear sound output.
How can you connect 7.1 speaker to your PC?
To connect a 7.1 speaker system to your PC, ensure your sound card supports 7.1 channel audio output. Use the appropriate audio cables (typically 3.5mm jacks or RCA connectors) to connect each speaker to the corresponding ports on the sound card or audio interface. Additionally, you may need to configure your audio settings in the operating system to enable 7.1 surround sound. Finally, test the setup using audio playback to ensure all speakers are functioning correctly.
How do you get audio from your computer to play on tv?
You need to connect the speaker out on your PC to the audio input on your TV. You need an adapter cable, as the computer usually has a minijack connector and the TV usually has two RCA connectors
What are audio connectors and where can I find it?
Audi connectors are connectors which connect your audio from one source to another. They can be found at places like Best Buy. Target and Walmart would also have them. As well, you can find them on Ebay and Amazon.
Can you use your camcorder to record from tv and what cable will you need?
First the TV will need to have audio and video output connectors. Then the camcorder will have to have audio and video input connectors. Then use a cable that has the correct type connectors to inter connect the two.
What is speaker cable used for?
Speaker cable is used to connect the speaker outputs on audio devices such as a receiver or amplifier to the inputs on the speaker(s).
How do you hook up my sony sa-va15 home theater active speaker system to my 32 inch seiki tv?
To connect your Sony SA-VA15 home theater active speaker system to your 32-inch Seiki TV, use an RCA to 3.5mm audio cable. Plug the RCA connectors into the audio output (usually labeled as "Audio Out" or "Line Out") on the TV and connect the 3.5mm end to the input on the Sony speaker system. Make sure to adjust the volume on both the TV and the speaker system for optimal sound. If needed, check the TV settings to ensure the correct audio output is selected.
What is the name of the red yellow and white wires that connect devices to the T.V. or other monitors?
Audio Visual Cables.
What are audio cables?
Audio connectors and video connectors are electrical connectors for carrying audio signal and video signal, of either analog or digital format. Analog A/V connectors often use Shielded cable to inhibit radio frequency interference (RFI) and noise. They use connectors such as SPEAKON, XLR, TRS and RCA.
Where do you connect a speaker system to a CD player?
Audio Output Jacks on the back of the CD player
