0
S-video carries two signals and requires two co-ax cables to connect them. There is no standard three wire S-video connection. Having said that, it is possible that a manufacturer has decided to provide a proprietary connection which is not recognized as a standard interface. The two screens of the conventional S-video co-ax may be linked together and so produce a three wire version. If that is the case, investigation will be needed to find out which is the screen, which is the luma signal and which is the chroma signal.
For a full answer, more detail will be needed. In the discussion area, add details of the appearance of both connectors, the manufacturer and model number of the two devices and a better answer is very likely.
What else can I help you with?
How to wire a 3-way switch with multiple lights?
To wire a 3-way switch with multiple lights, you will need to connect the power source to the first switch, then run a 3-wire cable between the switches. Connect the cable to the second switch and then run a 2-wire cable from the second switch to each light fixture. Connect the wires according to the wiring diagram for a 3-way switch setup.
What gauge of wire to connect electric dryer?
You need a 3 conductor #10 cable. A #10 wire is rated at 30 amps.
How can I wire a 3-way switch with a 3 lights diagram to control the lighting in a room effectively?
To wire a 3-way switch with a 3 lights diagram effectively, you will need to connect the switches and lights in a specific way. Start by identifying the power source and connecting it to the first switch. Then, connect the first switch to the second switch using a 3-wire cable. Finally, connect the second switch to the lights using another 3-wire cable. This setup allows you to control the lights from two different switches in the room.
Can you provide me with four way switch wiring diagrams for a complex lighting setup?
Here are four-way switch wiring diagrams for a complex lighting setup: Connect the power source to the first switch, then run a 3-wire cable to the second switch. Connect the second switch to the third switch using another 3-wire cable. Finally, connect the third switch to the light fixture using a 2-wire cable. Repeat this process for additional switches in the setup.
Which wire in a 240V cable with black white and bare copper wires connects to which prong in a 3-prong 30-amp 120-240V dryer outlet?
Do not use this type of cable to feed a 120/240V dryer outlet. The outlet is ungrounded, and the third conductor is neutral not ground. Your ground wire must be sheathed by code. You cannot use the bare neutral conductor as ground. Diagram Did Not Come Through. You Have a 3 Prong Connector. The Prong On The Bottom By Its Self Connect The Bare Wire. That Is What Was # 3 Connect The Others To The Two Prongs Next To Each Other. Hope This Makes Some Sense (1) (2) (3) Connect White To (1), Connect Black To (2) Bare (3) Good Luck
How do you wire 4 lights with 2 switches?
Wire the two 3 way switches using 3 wire cable (red, black, white and bare). Then connect the first light to the others using two wire cable (black, white and bare) kind of like a daisy chain. The power goes to the first 3 way switch, then switch one goes to switch 2 using the 3 wire cable (even though it has 4 wires in there), then the second switch goes to one of the lights. Hope that helps.
How can I properly wire a 3-way switch using 12-2 cable?
To properly wire a 3-way switch using 12-2 cable, you will need to connect the black wire to the common terminal on one switch, and the red and white wires to the traveler terminals on both switches. Make sure to follow the wiring diagram for 3-way switches to ensure proper functionality.
What is triad cable?
paired cable contains 2 conductors and a cable containing 3 conductors is called a triad.Used for 3 wire transmitters.
What size wire do you need to connect a camera that's 800' from the power source if it needs 24V AC and it draws 4A and uses 59W?
A gigantic expensive cable run of #8 gauge wire to a 3:1 transformer.
How do you connect a 3 wire 120 outlet to a 4 wire 240 outlet?
You don't.
How can a 3-way switch with power at the light be properly installed in a circuit?
To properly install a 3-way switch with power at the light in a circuit, you need to connect the power source to the light fixture first. Then, run a 3-wire cable from the light to the first switch, and another 3-wire cable from the first switch to the second switch. Connect the wires according to the wiring diagram for a 3-way switch setup, making sure to follow proper safety precautions and turn off the power before working on the circuit.
How to connect a 3-wire LED light to a 2-wire system?
To connect a 3-wire LED light to a 2-wire system, you can use a resistor to bridge the extra wire. Connect the positive wire of the LED light to the positive wire of the system, and the negative wire of the LED light to the negative wire of the system. Use a resistor to connect the extra wire of the LED light to either the positive or negative wire of the system. This will help regulate the voltage and ensure the LED light functions properly.
