0
What else can I help you with?
Will a mixer allow you to hook up your microphone to your laptop via usb and if so which cheap mixer is good?
What you need is an USB recording interface with a microphone preamp (like M-Audio Fast Track), they usually cost $100 and up.
I'm a noob to recording so if have a 9-track mixing board do I need a preamp to run a condenser microphone?
A preamp is required for all microphones, and is built in to the mixer if it accepts microphone inputs. The feature required for most condenser microphones is phantom power, a 48 volt signal that is supplied by the mixer to power the electronics inside the microphone. You must use an XLR (three pin) cable to connect the mic to the mixer to provide this power. There will be a Phantom or 48V switch on the mixer to turn this feature on and off.
What does a studio mixer do?
Many musicians and artists commonly use a studio mixer to help create songs. The studio mixer helps put a song together with a beat, tempo, and other mixing,
How can you build a cheap recording studio with equipment?
I have a recording studio in my house, but here is what I have... -Mic -PC -Speakers -Pop filter -Mixer -Preamp + additional things (couch, rug, etc.) I got all this equipment for under $700 I would recommend eBay or Amazon That's where I got everything I needed for cheap
How do you connect an audio interface to a mixer?
To connect an audio interface to a mixer, you typically use audio cables to connect the output of the audio interface to an input on the mixer. This allows you to route audio signals from the interface to the mixer for further processing or mixing.
How can I connect a mixer to an audio interface?
To connect a mixer to an audio interface, use balanced cables to connect the mixer's main outputs to the audio interface's line inputs. Adjust the levels on the mixer and interface to ensure proper signal flow and avoid clipping.
How do I connect an audio interface to a mixer?
To connect an audio interface to a mixer, you will need to use audio cables. Connect the output of the audio interface to an input on the mixer using the appropriate cables. Adjust the levels on both the interface and the mixer to ensure proper sound quality and balance.
What cable to use to connect laptop to pro sound mixer?
You would need a stereo 3.5mm jack to take the sound from the laptop, and depending on the inputs on the board you would likely use 2 mono 1/4'' jacks.
How can I connect a microphone to speakers?
To connect a microphone to speakers, you will need an audio mixer or amplifier. Plug the microphone into the mixer or amplifier using an XLR cable. Then connect the mixer or amplifier to the speakers using audio cables. Adjust the volume levels on the mixer or amplifier to ensure proper sound output.
Which mixer for under 250$ is best for a home recording studio?
A Rolls MX42 Mini Stereo Mixer is ideal for an in home recording studio and only cost around $47.00.
How can I connect multiple audio sources to a mixer with stereo inputs?
To connect multiple audio sources to a mixer with stereo inputs, you can use audio cables to connect the output of each source to a separate channel on the mixer. Make sure to use the appropriate cables and adjust the levels on the mixer to balance the audio from each source.
How do you connect Behringer Feedback Destroyer to mixer?
mixer main out TO behringer feedback destroyer input TO speakers
