0
What else can I help you with?
If you insert headphones into a audio in jack will it work or does it have to be audio out?
On my laptop I'm able to put skullcandys into my audio IN jack, i think it will work the same for you
Is it possible to get a 3.5 mm audio jack to work in an optical audio out port?
No. A 3.5mm jack is a copper electrical connector while an optical port isn't. Although it is possible to obtain converters between optical and copper, it is an expensive route to take and almost certainly there is a lower cost alternative to the problem.
Will this work for using external speakers with the PS4 PS4Optical Audio Cable Optical Audio to RCA Cable converter RCA Cable with 3.5 mm jack Logitech Speakers with 3.5 mm jack input?
To use analog 3.5 mm jack RCA cables and the PS4 optical audio cable, you will need a DAC; then your Logitech speakers should work.
Can digital audio output connect to digital optical audio input?
A coaxial digital output (usually an RCA jack) can connect to a digital optical input using a coaxial to optical digital converter. This is a small box that goes in between the two products.
How optical jack works?
An optical jack, often referred to as a TOSLINK or optical audio connector, transmits digital audio signals using light. It employs a fiber optic cable to convert electrical audio signals into light pulses, which then travel through the fiber. At the receiving end, a photodetector converts the light back into electrical signals, ensuring high-quality audio transmission with minimal interference. This method allows for high-fidelity sound over longer distances without degradation.
How do I route audio from my ps3 through my mac and into my sound system?
You have to plug the audio device's connector into the optical connection on the back of the system. The connection is next to the HDMI jack. The audio device must also be digital, not analog.
What is more common term for digital optical audio cable?
More common terms for digital optical audio cable; optical audio cable, cable, digital optical, but the shortest and most well-known term is "cable".
What is a optical audio cable?
An optical cable is a plastic or fiberglass wire that transmits digital audio from one device to the other.
What is rear panel optical jack?
A rear panel optical jack, often referred to as a TOSLINK or SPDIF jack, is an audio connection interface found on devices like televisions, sound systems, and computers. It uses fiber optic cables to transmit digital audio signals in a high-quality format, minimizing interference and signal degradation. This type of connection is commonly used to connect components such as DVD players to surround sound systems or soundbars, providing clear audio output.
What is a optical audio cable used for?
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable.
Your case has front panel audio and mic but doesn't cut audio from main speakers when you insert headphone jack in front panel?
The audio signal to the speakers are not cut off since the connection to the front panel and speakers are in parallel.
Is there a cord that can connect a tv with optical audio to a receiver that doesn't have optical audio?
You can get an optical to coxial converter box if your receiver has a coaxial digital input. If it doesn't, you will have to purchase an optical digital to analog (D to A) converter.
