answersLogoWhite

0

To install an amplifier to an Impala head unit, first, disconnect the negative battery terminal for safety. Connect the amplifier's power wire to the car's battery, ensuring a fuse is installed close to the battery. Run the ground wire to a solid metal point on the vehicle, and connect the remote turn-on wire from the head unit to the amplifier. Finally, connect the speaker wires from the amplifier to the speakers, and reconnect the battery.

User Avatar

AnswerBot

1mo ago

What else can I help you with?

Related Questions

Can you install an amp on a factory radio of a 06 Impala?

yes


Does a 2004 Chevy Colorado Ls have rca jacks?

No. If you are looking to install a amplifier, either install an aftermarket head unit or buy an amp that has speaker level inputs.


How do you install an amp in a 2003 Chevy Impala?

do you have an aftermarket head unit? Either way, you will need a wiring kit. Depending on what size your amp is, you may need a capacitor as well. Brands such as Scosche and EFX are 2 cheaper brands, but seem to work just as well for less cash. Expect to pay anywhere from $10 to $120 (+) depending on the quality and length of the wires.


How do you install a sub into a stock 2005 civic si head unit?

chances are you cant , you need the red and white plugs on the back of your deck to plug your amp into


How to install a amp and subwoofers in a 2001 Oldsmobile aurora?

you would just install them like you would on a normal car, but I'm assuming you are using the stock head unit which doesn't have RCA outputs, so you will need to buy a line output converter to run the RCA cables from the head unit to the subs


Where is the external stereo amp located in a 1999 4runner?

The external amp is located just behind and slightly lower than the head unit. Follow the wires coming out of the back of the head unit, they lead directly to the amp.


What wire goes to the rem on a amp?

The remote wire on an amp is usually connected to the remote turn-on lead from the head unit or a separate switched power source. This wire sends a signal to the amplifier to turn on or off based on when the head unit is powered on or off. It is typically colored blue on most wiring harnesses.


How do you get the best out of your car audio system?

Install a subwoofer, amp, aftermarket speakers, and a head unit. Possibly, the easiest way to get the best out of your car audio system is to upgrade the speakers.


How do you install a amp to a almera?

To install an amp in an Almera, you will need to connect the amp's power wire to the car's battery, ground the amp to a metal part of the car's chassis, and connect the amp's remote wire to a source that turns on when the car is started. You will also need to run RCA cables from the head unit to the amp for signal input, as well as speaker wires to connect the amp to the car speakers. It's recommended to consult a professional for the installation to ensure safety and proper functionality.


Can you install a stereo and sub woofer in a 323 1989 Mazda?

yes, easily...you will need a new head unit though. if you want a sub you will need a head unit with RCA outputs to connect the ammplifier. i run a panasonic head unit, 1200w amp, 2 12" subs, 4 mids and 2 tweeters in my 89' familia


Should your speakers be plugged into a head unit when using a speaker amp?

No


Can you install subwoffers into a stock Saab 9-3?

Yes you can... if you still have a factory head unit then you will need what is called an RF modulator which you will connect to one of the speakers. This will give you the Av imputs for your amp.