If your LG DVD remote has a TV control section, normally with a white line around it,simply hold the TV power on/off button and then push up and down on the TV channel selector. Your TV will turn off. The remote is programmed.
Hope this helps
The codes we here at DISH Network have & would use to attempt to program the DISH Network remote with your Olevia TV would be, 506 or 127.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
There are several different remote codes we have on file to program the DISH Network remote to work with your Symphonic TV that you can try the codes you can try are, 632, 569, 733, or 281.
You can program your DISH remote to work on other electronic equipment. The gyration remote should have instructions on how to program it to other components. If you don't have the instructions, I would give the company a call to try and get the instructions.
You can program your DISH remote to work on your TV and other electronic components but unless you have codes or instructions on how to a universal remote to the receiver, we don't have codes specifically to operate in that manner. I would contact the manufacturer of your remote.
To program a Dish Network remote to control a Cielo device, you typically need the specific TV code for Cielo. Commonly used codes include 10178, 10179, and 10180, but these can vary based on the remote model. You can find the exact code by accessing the Dish Network remote setup menu and selecting the appropriate device type. If the codes don’t work, consult the Dish Network website or user manual for additional assistance.
Try these remote codes: 743, 744, 745, 757. If these do not work, call Dish Network they will be happy to assist you.
No, the dish network remote only has those codes. If you want to control everything, get a Logitech Harmony remote.
Call the Dish Network to inquire about your remote and your new TV: 1 866 869-3109 Customer service can advise you and provide a new remote control if needed.
Some universal remotes can be programmed to work on the DISH receiver but you won't be able to use your Samsung TV remote to operate your DISH receiver. You can program your DISH remote to work your Samsung TV. I have provided instructions on how to program your DISH remote to your TV. I have also provide TV codes.TV codes: 738, 680, 516, 679, 666, 573, 665, 667, 669, and 653Remotes: Basic (Television Only)Turn the Television On.Press and hold the clear TV button for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.Possibly, depends on the remote
Auria TVs use the same codes as NEC. If you lookup NEC in your remote control manual it should work. 10037 will work.
Normally only our remotes will work with our receivers. Some universal remotes may be used but may not have all the functionality of our remotes. You would need to get the code for our receiver from the manufacturer or instructions on how to manually program the remote to our receiver.