To switch your LG TV to DTV mode, press the "Home" button on your remote control. Navigate to the "Settings" menu, then select "All Settings." Find the "Channels" section and choose "Antenna" or "Cable" depending on your setup, and ensure that "DTV" is selected as the input source. Finally, exit the settings, and your TV should now be in DTV mode.
To turn off wireless headset mode on an LG TV, go to the "Settings" menu from the home screen. Navigate to "Sound," then select "Sound Out." Choose "TV Speaker" or "External Speakers" to disable the wireless headset. This will switch the audio output back to the TV's built-in speakers.
DTV sometime needs a better antenna than the old analog TVs. A few stations did not switch to DTV and are still Analog like LPTV which is Low Power TV.
To change from DTV to ATV on your Samsung LE32C350 TV, press the "Menu" button on your remote. Navigate to the "Broadcasting" section, then select "Antenna" or "Source" to switch between DTV (Digital TV) and ATV (Analog TV). If there's a direct "Source" button on your remote, you can also use that to toggle between available inputs. Once you've made your selection, exit the menu to start watching.
formerly Hughes Electronics, Direct TV Group's ticker is DTV
Turn the TV and the DTV receiver on and be sure you have good batteries in the remote.Using the Select button and the arrow keys around it on the DTV remote:Menu Button>Parental, Fav's and Setup>System Setup or Setup>Remote>Program Remote>(there may be 1 or 2 more screens here depending on the DTV receiver model, just continue through them)>On the Devices screen select "TV">Select your television's manufacturer>STOP on the screen with the codes across the top.1. Push the Mode switch on the remote all the way to the right to "TV". Ignore the on-screen display that says "TV Keys Aren't Programmed."2. Push and hold the Mute Button and while holding it also push and hold the Select button until the green light above the Mode switch blinks once and then blinks twice in a row.3. Enter the first 5-digit number you see on the screen into the remote's keypad. The green light will blink twice again.4. Aim the remote at the TV and use the volume paddle. If the volume works, just push the Mode switch back to the left and your done. If it doesn't, repeat steps 2-4 for each successive number.5. Write down the correct number. Be sure to push the Mode switch back to DTV before doing anything else.
DTV Valentine - 1986 TV was released on: USA: 14 February 1986
Only LM8600 and LM9600 have the 4-mode (voice recognition feature)
DTV stands for direct TV, an alternative to cable providers. Many people find that DTV is the best option when cable is expensive - or when cable companies prove unreliable or frustrating.
Digital Television
What is the TV code for a universal remote for a Mintek DTV-323?
DTV Monster Hits - 1987 - TV was released on: USA: 30 October 1987
What is the TV code for a universal remote for a Mintek DTV-323?