It won't change the volume of the music majorly but it's the base and sound quality that makes a difference. if you have a low bit rate it might be scratchy or wont sound a s good on high quality speakers.
A typical MP3 file is 5MB, so 700MB holds around 140 songs. It depends on the bitrate of the song of course. CD audio is in Wave format, at around 10 times the bitrate of MP3, so it will take up around 10 times the space. The lower the bitrate, the smaller the files will be, but the worse the audio quality will be.
The audio recording time for 32 kilobytes (KB) depends on the audio format and bitrate. For instance, at a common bitrate of 128 kbps (kilobits per second), 32 KB would provide approximately 2 seconds of audio. At lower bitrates, such as 64 kbps, the recording time could extend to around 4 seconds. To calculate accurately, divide the file size in bits (32 KB = 256 kilobits) by the bitrate.
No, 320 kbps is not considered CD quality; rather, it refers to the bitrate of an audio file. CD quality audio is typically defined as 16-bit/44.1 kHz, which corresponds to a bitrate of approximately 1,411 kbps in uncompressed PCM format. However, a 320 kbps MP3 file is a high-quality compressed audio format and is often regarded as the best quality for MP3s, providing good fidelity for casual listening.
The amount of minutes in a video file cannot be determined by it's file size. The file size of the video is determined not only by it's length, but also by the size of its resolution, the audio bitrate, the type and amount of compression amount used for audio and video, the type of format it's rendered as, and possibly other factors.
A MP3 file is actually a compressed WAV file. The compression is: WAV file size / MP3 file size Bitrate is the amount of kBits a mp3 file uses in 1 second. So a 320kB/s file uses 320kBit in 1 second(or 40kBytes/s) The relation is that if the bitrate gets bigger, the compression get's lower.
so if there is no bitrate then the file is infected ?
Right click and properties
Avidemux shows the error message "bitrate too low" when exporting a video file because the bitrate setting for the video is not high enough to maintain the quality of the video during the export process. Increasing the bitrate can help improve the quality of the exported video.
Bitrate
Several factors determine the quality of music reproduction on a computer, including the audio hardware (sound card or built-in audio), quality of the speakers or headphones, audio file format, bitrate and sampling rate of the music file, and the audio player software being used to play the music. Having high-quality components and using lossless audio formats can help improve the overall sound quality.
ffprobe is a command-line tool used to analyze multimedia files. You can use it to get information about a video or audio file, such as its format, duration, bitrate, and codec information. For example, you can run the command "ffprobe video.mp4" to get detailed information about a video file named video.mp4.