How To Install A DVR Security Camera Surveillance System In Your Home For Your Family’s Protection?
Installing a DVR Security Camera Surveillance System in your
home can be a great source of protection for you and your family.
These systems can alert you to problems that lurk outside of your
home as well as inside. Security cameras also give you added
protection in the event that you have child caregivers in your home
to look after you children. Here is a simple guide to help you
install a security system in your home.
Security Camera Installation
Step 1. You will need to decide where you want the surveillance
cameras installed. Common places should be gathering areas like
patios and entertainment rooms, where valuables are kept and at all
entry locations. Areas around garages should also be
considered.
Step 2. You will need to mount the cameras in place. The cameras
can be placed on walls, ceilings or placed onto tall furniture. The
higher the cameras are placed the wider angle you will be able to
monitor.
Step 3. If you are using a wired surveillance system, you can
run the wires directly from the camera to the DVR recording device.
In most cases only one wire is actually needed for each camera
because it carries both the power and signal. Wires should be
hidden to prevent tripping and from being noticed.
Step 4. If you are using a wireless surveillance system you will
need to plug the receiver into the DVR recording device. Each
camera must be plugged into a power outlet also.
Installation of the DVR Recording Device
Step 1. Considering the amount of recording you want to do at
one time, your budgeted amount for this project and the amount of
cameras you want to install will determine the type of DVR
recording device that will best suit your needs.
Step 2. Most dedicated DVR devices are about the size of a home
computer system. These systems can be quite costly but provide the
greatest amount of video data storage and coverage for your home.
If you decide against a dedicated DVR option an alternative is to
hire a professional to install a DVR car into your home computer
system to allow for video recording. This options gives you the
same coverage as a dedicated DVR device but only costs about half
as much. The third option that you have for your DVR recording
needs is to connect a DVD interface to your personal computer with
a USB cable. This option does not hold as much data but it does
serve the same purpose. This option costs about half as much as the
DVR card option.
Step 3. You will need a DVR that has enough ports for each of
your cameras if you use the wired system option. Using wires or
plugs, connect the cameras to your DVR.
Step 4. If you choose the DVR card or DRV interface option you
will need to install the required software applications to your
home computer system.