0
What else can I help you with?
How do you reboot your PS3?
When the ps3 is off, hold down the power button on the system for about 10 seconds. It should turn on right as you press it then it will turn off and on again. It will restore settings to normal.
How can I reset motion lights?
To reset motion lights, locate the power source and turn it off for at least 30 seconds before turning it back on. This should reset the motion sensor and restore the lights to their default settings.
How do you refresh BIOS of a system?
Reinitialising the BIOSAs BIOS setup is used to edit hardware settings, changing them might cause the system to become unstable, and it might not even restart. When this happens, the changes to the BIOSmust be cancelled, and the default settings must be restored.If the computer boots up and you can access the BIOS, it will usually allow you to return to the default settings. In PhoenixBIOS, press F9 to return the configuration to the defaults set by the manufacturer. In AwardBIOS, press F9 to restore the previous settings, F6 to restore Award BIOS's default settings, and F7 to restore the defaults set by the motherboard's manufacturer.If you cannot access the BIOS using standard procedures, most motherboards include a jumper for resetting the default values. Simply change the jumper's position, then leave it there for about ten seconds.
How long does it take to restore an ipod shuffle?
a few seconds, a minute tops
How do you restore your iPod touch?
There are two ways to restore your ipod touch. Hold the sleep/wake button and the home button for ten seconds until the apple symbol appears. Or you can plug your ipod into itunes and restore from there. The itunes restore is a more complete way to restore.
How do you reset ds lite to factory settings?
remove the battery for about 15 seconds then it will ask to put in some settings and info.
How do I reset a RCA CD player model number RS2028?
To reset the RCA CD player model RS2028, first, unplug the device from the power source. Wait for about 30 seconds, then plug it back in. If the player has a reset button (usually a small hole), use a paperclip to press it for a few seconds. This should restore the player to its default settings.
How do I reset the Frigidaire oven using the reset button?
To reset a Frigidaire oven using the reset button, locate the reset button on the control panel. Press and hold the button for a few seconds until the display resets. This should restore the oven to its default settings.
How do you speed up lots of pictures at once in Windows Movie Maker?
Wonderful Wanda says:You can speed up all the pictures in your project by changing the Duration Default Settings:> Click Tools, Options and the Advanced tab> Use the up/down arrow key to the right of Picture Duration (lowest is: 0.125 seconds)> Use the up/down arrow key to the right of Transition Duration (lowest is: 1.25 seconds)> Click OkThis will change all the media in your project to the lowest duration possible (if selected) so that your pictures speed up automatically. Watch results of your settings in the Preview pane and adjust to desired duration.Remember to Restore the Default settings when you've finished or the settings will be applied to all other projects opened in the future. Some people forget to Restore the Default (which is automatically a 5 second delay) and wonder why their video/media is speeding through so quickly. So, remember to Restore the Default when you're done.
How do you reset an apex television?
There are 2 ways to reset your Apex television. 1.) Hard reset. Unplug your TV for approx 4 hours (Maybe longer) and it should restore to factory settings. 2.) Turn your TV on. Proceed to turn TV off, Never letting go of the power button. Hold the power button for approx 20 seconds. Turn the TV back on. This should restore your TV to its factory settings. (I do not know that the second works on all models, but I have an older one, and this has worked for me.)
How to put PC back to factory setting?
to put xp back to factory settings 1)shut down your pc. 2)let it sit foe about 30 seconds. 3)power your pc back up and hit ctrl&f11 at the same time and follow on screen commands.
How do you fix your iPod Classic when it has frozen?
Reset it. Move the lock bar into a lock position and then back to unlocked. Then press and hold the center and Menu button simultaneously for about 6 seconds or until the Apple logo appears, then release the buttons. You will not lose any of your settings or content.
