called a star cable box key or shouldered star lock key. available from cable box companies.
some keys have a pin in the middle of the tool and some dont. keys are pattern specific and used on CATV Telecommunications enclosures. each key fits a specific slamlock or starlock.
a quick search shows pictures at newelectronx.
you get the cable fixed then open it
Solar Cave. You might need a key to open the box. You can find a link cable inside.
check the hood pull cable may need a new one
YOU NEED TO CRAWL INTO THE TRUNK FROM THE INSIDE. AT THE CENTER OF THE GLASS WHERE THE GLASS LATCHES, THERE IS A 4" CABLE TUCKED IN TOWARDS THE BACK OF THE VEHICLE. THAT IS THE MANUAL RELAESE CABLE. PULL IT.
The "curb stop" is the valve that is on the service from the main into your house. i.e. The 8" main in the street has a saddle tap with your 3/4" service line on it. Within 8 ft of the connection between your service and the main is your curb stop. The curb stop is a valve buried underground. In order to open/close the valve a curb box is placed over the valve. It is essentially a metal tube that lets you open and close the curb stop.
HOW DO I OPEN HOOD ON CAR WHEN CABLE IS BROKEN
you need cable tray rated wire to use in a cable try a cable tray is basically open to air so the current rating of the wire doesnt need to be reduced if you have more than 4 conductors cable tray rated tubing is fine( temperature flammability) steel or copper is fine.
go to the driver side door and look for the latch to open the hood. no need to open the hood, look above it and you will see a small door with a flip cover towards the back. open the door and connect the computer cable or what not.
how to open hood with a broken cable on a 1994 ford explorer
how do you open the hood on a 1992 buick regal if the cable is broke
To open mr. red's door you need to go into his house then go into 3D and talk to him in 3D and say your favourite color is red. To open mr. green's door you need to say your favourite color is red again.
From under car... its not too bad on a lift you can find cable near the hood need to get the inner wire and pull with pliers