Here are the codes for the Dynex TV: 720 and 727
I have also provided instructions on how to program the remote to your TV.
Remotes: Basic (Television Only)
dish network remote codes for Dynex DX-wbrDVD 1 and proper way to program the control to DVD
What is the code for comcast remote for Supersonic TV
universal code for dynex dx dvd2
To program Dynex code for AT&T, you typically need to access the programming interface of the Dynex device, often through a web browser or a dedicated app. You'll then enter the necessary configurations, such as network settings and account information, following the specific guidelines provided by AT&T. Ensure you test the setup to verify that the programming is successful and the device is functioning correctly. For detailed steps, always refer to the user manual or support resources for your specific Dynex model.
The code for the Dynex 32"lcd TV dx-32L152A11 on bell Express tv is 720 #. that is the code that worked for me
Hope this helps anyone like myself that was trying to set the remote codes on a Yamaha Receiver remote for a Dynex TV. I have a 32" Dynex in a second viewing area that I wanted to control with the RAV367 remote from my Yamaha RX-V1800 AV Receiver. I went through dozens of codes gathered from numerous websites, all with no luck. I finally decided to try programing it directly remote to remote with Yamaha's "Programing codes from other remote controls" chapter on page 104 of the RX-V1800's owner's manual. To my delight it worked perfectly and I now have most of the remote commands I use most often. The only alteration I made was to use the "TV Mute" control button on the RAV367 to set the TV input from the Dynex remote while using the "TV Input" button on the RAV367 to control the HDMI input. Other than that slight alteration every function I normally used on the Dynex remote I can now control with the Yamaha remote. I hope this helps.
I just bought the Samsung BD-C5500 HTiB and used code 85 listed under Emerson to control my Dynex 40" LCD TV. It does not seem to work for "Function/TV Source" but Power, Vol & Tuning/Ch work well.
rca universal control
We have 2 codes for your Dynex TV: 720 and 727. I have provided instructions on how to program the remote to your TV.Remotes: Basic (Television Only) Turn the Television On.Press and hold the clear TV button (on the DISH remote) for three seconds until the LED flashes.Enter the three-digit code using the buttons on the number pad.Press #. Note: The LED will flash three times.Test functionality with the TV.Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
10463 worked for me
the dynex code is 096 for the Amino Aminet 125 remote control. Ensure your tv is turned off before entering the code. As stated in the Aminet user manual, the red light on the remote should turn off when the correct code is entered, but you have to manually click the tv button on the remote to turn the light off. This should work.
Contact your remote control manufacturer customer service team