0
What else can I help you with?
How long can an optical audio cable be?
I'm a theatre and stage technician who primary works in the area of sound design. We commonly use optical cables in the theatre to send as many as 8 full audio streams at a time down the line using something known as ADAT. While professional optical cables are identical to consumer cables, except that they're often much less expensive, they are sometimes used in runs that can go extremely far, as much as 100 feet or more. That said, the technical specification from Toshiba, who invented the cables, is 32.8 feet.
Will this work for using external speakers with the PS4 PS4Optical Audio Cable Optical Audio to RCA Cable converter RCA Cable with 3.5 mm jack Logitech Speakers with 3.5 mm jack input?
To use analog 3.5 mm jack RCA cables and the PS4 optical audio cable, you will need a DAC; then your Logitech speakers should work.
How do you connect Yamaha rx-v367 to an LG LD500 for surround sound?
To connect a Yamaha RX-V367 receiver to an LG LD500 for surround sound, use HDMI or optical cables. If using HDMI, connect the HDMI OUT from the RX-V367 to the HDMI IN on the LG LD500. For optical, connect an optical cable from the digital audio output on the LG LD500 to the optical input on the receiver. Make sure to configure the audio settings on both devices to enable surround sound output.
How many cables types there and how many varity of materials using for cables manufactruing company. all kind of power cables advantages also different between cable to cables?
there are 3 types of cables are there 1 Twisted wire a) UTP ( Unshielded Twisted Pair b) STP ( Shielded Twisted Pair 2 Co-axial cable 3 FOC ( Fiber Optical cable )
What are the advantages of using twisted-pair cables?
These cables are used in telephone lines to provide voice and data channels.
How do I connect an audio interface to a mixer?
To connect an audio interface to a mixer, you will need to use audio cables. Connect the output of the audio interface to an input on the mixer using the appropriate cables. Adjust the levels on both the interface and the mixer to ensure proper sound quality and balance.
Can digital audio output connect to digital optical audio input?
A coaxial digital output (usually an RCA jack) can connect to a digital optical input using a coaxial to optical digital converter. This is a small box that goes in between the two products.
What are the advantages of using Orb Audio speakers?
There are many advantages to using Orb Audio speakers. One advantage is that the speakers are small and compact in design and are easily placed anywhere within your decor.
How do you connect a DVD player to a Bose system?
To connect a DVD player to a Bose system, use an appropriate audio and video cable such as HDMI, optical, or RCA. For HDMI, connect the DVD player's HDMI output to an available HDMI input on the Bose system. If using optical or RCA cables, connect the corresponding audio outputs from the DVD player to the audio inputs on the Bose system. Finally, ensure the Bose system is set to the correct input source to hear the DVD audio and see the video.
How do you control audio hiss?
One way to reduce hiss is to increase the quality of the cables you are using.
Does one HDMI cable from your tv to your cable set top box handle both the video and the audio or do you still need two separate cables like you would using component cables?
HDMI cables carry both video and audio. You only need one.
How do you connect your Yamaha htr-3065 to your Toshiba 40RV753 with either HDMI or optical cables?
You can connect a Yamaha HTR-3065 to a Toshiba 40RV753 using either HDMI or optical cables connected to the input ports. Both devices are turned off, the cables are connected to the ports of each devices, and then both are turned on.
