A `standard headphone jack cable' usually refers to a 1/4" connector. The `mini' is what is normally found on items like a portable .mp3 player or CD player, which is to say, 3.5 mm. in diameter.
Yes. Connect an audio cable to the headphone jack.
Almost all portable radios have a headphone jack. Even radios that are ten years old or more have a headphone jack so its pretty much standard.
Yes the Philips model PET7402/37 does feature a standard headphone jack built in for personal listening.
Emirates provides a standard 3.5mm headphone jack on their flights for passengers to use with their own headphones.
The RGB cable is VIDEO only, get the AUDIO from the HEADPHONE jack on the computer.
You can connect your phone to a guitar amp using a guitar cable with a 1/8-inch headphone jack adapter. Plug one end of the cable into your phone's headphone jack and the other end into the amp's input jack. Adjust the volume on your phone and the amp to get the desired sound.
First off, your Kindle needs to have a standard 3.5mm output audio jack. If it doesn't have that, then you can't use the Kindle with your Beats headphones. If it does have a standard 3.5mm output audio jack, simply plug the 3.5mm cable that comes with the headphones into the headphone jack. Some Beats headphones come with either a 1/4 inch cable or cable adapter; in which case you must either use the other cable provided with your Beats headphones, or remove the adapter.
Yes. The Eternity is a very rare breed of Samsung phones that do not require the proprietary headphone jack as with most of their other phones. You can use any standard headphone jack with the samsung eternity.
The Xbox One's headphone jack is a standard 3.5mm audio jack, allowing it to connect with a variety of headphones and headsets. This compatibility enables users to enjoy audio for gaming and chat without needing specialized connectors.
Is this a trick question? The size of a 3.5mm headphone jack is 3.5mm.Did you mean "is a typical headphone jack 3.5mm? Or is it smaller/larger?"A typical mp3 player headphone jack is 3.5mm.
That depends. If they're computer speakers and all your wires are headphone-jack style, then all you do is run the headphone wire from your speakers and plug it into your computer speaker input on the sound card, or a headphone jack. If they're not computer speakers and you want to wire component speakers through your computer, you'll need a receiver to power them, speaker wire to go from your speakers to the receiver, and a cable to go from your receiver "input jack" to your computer. That cable should have a red and white RCA on one end, and a headpone jack on the other.
The iPad has a standard 3.5-mm stereo headphone jack and will work with most brands of earphones.