HDMI cables are best for computers with HDMI capabilities.
To connect the Connect Amp to your computer, you can use a digital audio cable such as an optical cable or a coaxial cable. Simply plug one end of the cable into the digital audio output on your computer and the other end into the digital audio input on the Connect Amp. This will allow you to play audio from your computer through the Connect Amp and your speakers.
YouQ=?
yes most sound cards have an audio-in input. Just look on the back of your computer, right next to where you have your current speakers plugged in there should be another input for an audio cable.
You can plug a guitar into a computer by using an audio interface or a USB guitar cable. Connect the guitar to the interface or cable, then plug it into the computer's USB port. You may need to adjust the computer's audio settings to recognize the guitar input.
You can turn on your monitor's speakers by inserting the audio jack into its audio-in port. If no audio is heard, ensure your computer's system volume is turned up.
The RGB cable is VIDEO only, get the AUDIO from the HEADPHONE jack on the computer.
a digital cable is best but an RCA cable is decent too
Yes, you can connect your desktop to your home audio speakers. The audio cable would go from your sound card to your home audio receiver which in turn would play out of the speakers. However, it would be much easier to use your desktop computer sound with desktop speakers. Desktop speakers can be plugged directly into you computer through a usb cable or audio cable and are available in a two speaker set or surround sound set ups. anonymous@oola.com
S-video is a video only cable, you must add an a extra audio cable.
You can currently not connect a DSi to a computer VIA cable, but you can use an SD card. With this you can manage photos and audio.
You sound card should have a audio in port.
To connect an electric guitar to a computer, you will need an audio interface with a guitar input, a USB cable, and recording software. Simply plug your guitar into the audio interface, connect the interface to your computer using the USB cable, and open the recording software to start playing and recording your guitar.