What is the dish network remote control code for samsung bd-5700?

Answer 1

You can program the DISH remote to the Samsung TV but not the Samsung remote to the DISH receiver. I have provided the instructions for programming the remote to your TV, along with the TV codes.

TV Codes: 738, 680, 516, 679, 666, 573, 665, 667, and 669

Remotes: Basic (Television Only)

1. Turn the Television On.
2. Press and hold the clear TV button for three seconds until the LED flashes.
3. Enter the three-digit code using the buttons on the number pad.
4. Press #. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Answer 2

I have provided codes specific to the Samsung component. The codes are 881, 755, 738, 517, 675, 591, 579, 534, and 515. I have also provided instructions on how to program the remote to your component.

Address To Other Equipment Using Code

• Remotes: Multiple Mode Buttons (TV, VCR, AUX)
  1. Press and hold the desired mode button until all mode button back lights come on, then release.
  2. Use the number buttons to enter the device code corresponding to the equipment. AUX Mode: Before entering the device code:
     • Press 0 for a TV
     • Press 1 for a VCR/DVD
     • Press 2 for any other device
     Note: The light will blink off after each digit is entered and then return to a steady light.
  3. Press the POUND (#) button.

     If the code entered is valid for the remote, the mode light flashes three times.

If the codes don't work you can try a power scan.

Address To Other Equipment Using Power Scan

• Remote: All Remotes (except Basic)
  1. With the desired equipment on, press and hold the correct Mode button until all mode button back lights illuminate, then release.
  2. Press and release the Power button. AUX Mode: Before pressing and releasing the Power button
     • Press 0 for a TV
     • Press 1 for a VCR/DVD
     • Press 2 for any other device
     Then Press STAR (*)
  3. Press the Up button once a second while pointing the remote at the desired equipment. Note: If the code for the equipment comes up, the equipment will power off.
  4. Press the POUND (#) button. Note: If the code entered is valid for the remote, the mode light flashes three times.

Code#849 in the DVD mode works most of the setting.

Answer 3

There are a few different DISH Network remote codes that you can try for your Samsung DVD player & one should successfully program your remote, 591, 738, or 517.

Answer 4

The codes available for the Samsun Blu-Ray player are listed below!

Codes: 652, 515, 591, 517, 579, 807, 534, 675, 755.