plz provide salora CTV service mode all model
vijay
mode service westpoint
It is a special configuration mode that allows for servicing the TV. A technician may use the service mode to configure the TV to accept input from a new type of signal.
service mode
Salora International was created in 1968.
Salora - Finnish company - ended in 1995.
Salora - Finnish company - was created in 1928.
google search
This is a quote from the service manual for a sharp 13N-M100B television, Chassis No. SN-010, but I have no idea if these instructions will work on any other Sharp model TV or not. "To enter the service mode and exit the service mode. "While pressing the Vol-up and Ch-up buttons at the same time, plug the ac cord into a wll socket. "Now the TV is switched on and enters the service mode. "To exit the service mode, check that customer adjustments are in the normal mode. Use the reset function in the video adjustment menu to ensure customer control are in their proper (reset) position. Suggest you get a service manual before you start fooling around with the adjustments, unless you're absolutely sure you know what you're doing (that you're experienced with television circuits and with the hazards of the high voltage out of a HV Flyback transformer.
The service mode for the TCL LED24T2100 typically involves accessing a special menu that allows for advanced settings and adjustments. To enter this mode, you usually need to press a specific combination of buttons on the remote control or the TV itself, often involving the "Menu" or "Settings" button, along with other keys. This mode is primarily used for service technicians to troubleshoot or calibrate the TV, and it's not recommended for regular users due to the potential to alter critical settings. Always refer to the user manual or consult a professional for guidance.
while in stand by mode sequentially press display-->menu-->mute-->ON. try to press these buttons quickly.this will switch on the tv in service mode. then go to adjutment menu and ajust PSV,PSH
With the television turned off, press mute, 1, 8, 2, power on the remote. This will put you into the service menu. Be VERY careful! only change what you understand. Click down to Hotel Mode and change it to off.
service mode tcl21k77