plug it up your butthole then it works jokes
There is no way to connect these two without spending around £60 on an adapter. It would be cheaper to buy a Freeview HD box, then connect this to the screen with HDMI.
Depends on the sockets available on the computer and TV. Some modern TV's have a 15 pin PC monitor plug, which can be used with a connecting cable (15 pin male to male) to the monitor output of your laptop or desk PC. You will have to select the AV input on the TV and also the monitor output of your computer. On a laptop this may involve selecting the output from the built in screen, to the output, using the Function (Fn) key and one of the F keys. eg. Fn+F5. Other TV's may have SCART sockets for the AV in. You may need a separate converter box from USB to SCART or Monitor to scart. Some modern PC's may have an HDMI socket, which is used on most LCD TV's.
To convert a SCART signal to an S-video signal, you can use a SCART to S-video adapter. This adapter will allow you to connect the SCART output to the S-video input, enabling you to view the signal on a device that accepts S-video input.
Yes, if you have 2 scart sockets to plug them into but it would be pointless as you only need one.
In addition to the standard AV cable, the Sega Dreamcast can also use RGB SCART cables for enhanced video quality, particularly in regions that support SCART connections. VGA cables are another option, allowing for high-resolution output when connected to a compatible monitor. Additionally, third-party HDMI adapters can provide a modern connection to HDMI-equipped displays, improving compatibility with contemporary TVs.
One can buy a Scart adapter from the local store and online stores such as the following; multi scart adapter on amazon, Tesco scart adapter with switcher on Tesco, and delupe.
A Freeview set top box is a digital television receiver for use in the UK and delivers analogue signals at the output, for use with analogue televisions. All Freview receivers have video and audio outputs and normally these are found on a scart connector, the European multi-pin AV interface. If a television has no scart connector, it may be possible to use separate video and audio connectors, normally phono or RCA sockets. If the television doesn't have any kind of video input, then the only option is to use the RF connection. Not all Freview units have an RF output. If the Freeview signal must be taken into the television, then the receiver must have the output signal encoded to RF. Note that some Freeview receivers have an RF output but only to loop through the antenna signal and do not deliver the digital programme to the RF output. To be sure that it will work, you must ask the question "does the output of this receiver feed the RF output?" Remember that many salesmen will not know the answer to this, may say yes to get the sale and you get a unit that doesn't work. If that happens, you are fully entitled to return the unit and get a FULL refund as long as you asked the question before you bought it. (The Sale of Good Acts make complete provision for this). This isn't meant to be an attack on salesmen by the way but I have a big problem with poorly trained sales staff gicing out incorrect information!
The term SCART refers to the video/audio television connector.
The output voltage of a digital receiver will vary depending on the design and manufacture of the particular receiver, and the output system used. It is normally quite low, typically between 1 and 5 volts, ranging up to 12 for some SCART connections.
Shops that sell housewares or electrical equipment usually sell scart connectors. Some supermarkets sell scart connectors as well. Scart connectors can be bought online in websites such as Amazon or Ebay.
A scart connector is a European standard for video, audio and control communication between domestic television equipment. It is used only for standard definition video but supports composite, S-video and component signal formats. It also carries stereo audio and a limited number of control lines. The connection is often bi-directional to allow an output of a television to be routed to a video recorder as well as from the recorder to the television. The scart connection is being replaced by HDMI in new equipment so the days of the 21 pin scart connector are numbered. The signals are compatible with those on phono (RCA) connectors so equipment that does not have a scart connector can still be linked using a scart to phono break out lead.
HDMI is not the same as SCART. HDMI is digital interface while SCART is analogue.