0
Turn on ignition (without starting engine) - make sure the odometer is set to actual vehicle mileage (NOT the trip meter) - push in on the odometer/trip meter switch and turn off the ignition - turn ignition back on continuing to keep the switch depressed for about 5 - 10 seconds. The odometer readout should change to all zeroes - the service reminder function is now re-set. (note: this procedure is explained in your owner's manual).
What else can I help you with?
How do you Reset Maintenance Warning Light on a 2008 Toyota 4Runner?
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
Why does the Highlander maintenance light come on?
This is basically an "oil change reminder" light. Check your manual on how to reset it.
How do you reset the maintenance light on Toyota Camry?
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
How do you reset oil change light on Toyota Highlander 2012?
To reset the oil change light on a Toyota Highlander 2012, switch the engine to the OFF position. Then switch the engine back on while pressing the trip meter reset button until it displays 000000 or says COMPLETE.
How do you reset maintenance light on Toyota Corolla 2010?
How do you reset maint read light on 2010 corolla
Reset the maintenance required light on 08 Toyota rav 4?
maintenance with engine
How do you reset the maintenance light on a 1999 Tacoma?
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
How do you reset the maintenance reqired light in the 2011 smart key Toyota RAV4?
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
How do you reset the vsc light on a 2002 toyota highlander?
To reset the VSC light on a 2002 Toyota Highlander, first, turn the ignition to the "ON" position without starting the engine. Press the gas pedal to the floor three times within five seconds, then turn the ignition off. Start the engine, and the VSC light should be reset. If the light persists, there may be an underlying issue that needs to be diagnosed.
How do you reset the maintenance required light in a 2007 Toyota?
To reset the maintenance required light in a 2007 Toyota, first, turn the ignition switch to the "OFF" position. Then, press and hold the trip meter reset button while turning the ignition to the "ON" position (do not start the engine). Continue holding the button until the maintenance light flashes and then turns off. Release the button, and the light should be reset.
How do you reset the maintenance required light on a 2007 Toyota Tacoma V6?
disconnect the battery
How do you reset the touch screen display on a Toyota Highlander?
how to reset display screen after changing oil at 15000 miles. this is on a 2008 highlander.
