answersLogoWhite

0

I need more information to get this right, if you let me know a few things, I will try to help you out. First I need to know if you have spark on all plugs. Remove the plugs, lay them where you can get a good ground for them, pull the engine over and make sure they all spark. Make sure kill switch is up and key is in the on position. If one or more spark switch the plugs around to see if that changes which ones spark. If you have spark put your finger over a spark plug hole with heavy pressure, pull the engine over, do this to all hole one at a time, making sure all cylinders have compression can all are very close in pressure, you can use a compression tester for this for a more accurate reading, but a finger test should let you know enough to get it firing. If you need to go futher let me kow on my board, and we will go through more testing.

User Avatar

Wiki User

15y ago

What else can I help you with?