0
What else can I help you with?
Application to get on overhaulin?
1978 mustang
Which direction does rotor turn on a 1988 mustang 5.0?
counterclockwise
Will 2002 mustang transmission fit 1998 mustang both 3.8l?
Not unless you can make universal mounts for the transmission, and you will have to figure the dimensions for the transmission and if it will fit JUUUUST right in it.
Can you run 04-09 mustang wheels on vintage mustang?
They make adapters for most every application, just check offset before dropping a bundle.
Where could you buy a mustang horse and how much in US dollars?
You can "buy" or atleast adopt a mustang from the Bureau of Land Management. The starting cost is actually a bid of $125. Before you can place a bid on a horse you have to fill out an application and make sure you meet the requirements that are given on the application and/or website.
What direction does a 1976 ford mustang distributor rotate?
4 cylinder and V6 engines - CLOCKWISE V8 engine - COUNTERCLOCKWISE
What direction does a pully tentionure turn to come off?
i have a 00 mustang with a 4.6l gt. i need to pull off the pully tentionere. but i dont know what direction the bolt should be turn to losen it up. does any one know what direction.
Will a 2000 ford 3.8 mustang engine fit into your 1998 mustang with a 3.8?
Yes but they utilize two different types of induction styles and heads, the 2000 being the better. Go to www.supersixmotorsports.com and they will point you in the right direction.
Which direction does the distributor turn on a 1979 Ford mustang 5.0 HO?
Take the distributor cap off an crank the engine or turn the engine by hand clockwise and note the direction of the distributor rotor.
What direction does the distributor rotor spin on an 1989 ford mustang 2.3L?
Clockwise , firing order 1 - 3 - 4 - 2
Where is the temperature sending unit of a 73 Mustang 351 Cleveland?
In a 1973 Mustang with a 351 Cleveland engine, the temperature sending unit is typically located on the intake manifold, near the thermostat housing. It is usually threaded into a port on the manifold itself, allowing it to measure the coolant temperature as it circulates. This position provides an accurate reading of the engine's operating temperature.
Where is the IAT sensor for a 1990 ford mustang 5.0?
what is meant by IAT. The IAC is located right in front of the throttle body. The Intake Air Temprature sensor is threaded into the cylinder number FIVE intake runner in the lower intake manifold.
