answersLogoWhite

0

if i remember correctly, it's 1-3-4-2.

if you're on the right side (passenger side) of the car and your looking into the engine bay, it should look like this:

◄inside of car, firewall

___

| |

|O O|

|O O|

\__/

►front of car, headlights

the bottom left is the first firing position, and it goes clock-wise

◄inside of car, firewall

___

| |

|2 3|

|1 4|

\__/

► front of car, headlights

so this is what the firing order is. this is NOT the same as the cylinder order!

when you're looking at the engine, it'll look something like this:

the distributor cap is on the left side of this diagram, the headlights are on the bottom and the inside of the car it on the top.

↓the intake manifold is right here↓

_____________

| |

| O O O O |

| |

| ____________|

↑the exhaust manifold (headers) are here↑

the cylinders are numbered like so:

↓the intake manifold is right here↓

_____________

| |

| 4 3 2 1 |

| |

|_____________|

↑the exhaust manifold (headers) are here↑

so the firing order from the dist. cap goes like this.

Dist. cap Cylinder

1 1

2 3

3 4

4 2

you'll know it's right when it runs good. if it's wrong, it sounds like it's run like junk. like it's a wrx or something. don't leave it like that. it'll cause serious damage to the engine if it's left like that. also, it will have no power at all. so there's no point in leaving it like that.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is the correct placement of distributor wires from the spark plug to the distributor cap on a 1991 Honda CRX SI 1.6 liter DOHC?

hondahookup.com has manuals u can download with the info u need


What is the iring order and spark plug wiring for 1989 Honda CRX si?

1-3-4-2


Are spark plug sockets standard on all vehicles?

no 91 crx takes a 5/8 spark plug socket


What is the spark plug gap for a 1987 Honda CRX si?

0.044


What is the spark plug gap on a 1987 Honda civic crx si?

44


What is the recommended spark plug gap for a 1988 Honda CRX?

.044 mm


What is spark plug gap for a 1989 Honda CRX si?

The spark plug gap on a 1989 Honda CRX Si is .044 mm. Auto part stores carry these plugs pre-gapped to make for easy installs.


How do you change spark plugs on a 1988 Honda CRX?

Pull the wires out of the top of the motor, they have a long plastic boot on the end of the wire. Using a spark plug socket and a long extension you will be able to remove the spark plugs. Check the gap on your new plugs and I like to use a section of hose that fits on the top of the spark plug to to thread the plug back in. That way you reduce the chance of cross threading. Once you get them started you can tighten them down. I usually replace the wires when I replace the plugs. I would suggest replacing the plugs/wires one at a time to reduce the risk of mixing the wires up.


Crx wont start?

check spark check spark


Where is the diognostic plug for a Honda CRX 1993?

There isn't a crx diagnostic plug on any vehicle prior to 1996


What is the distributor cap order for a 1986 Honda CRX?

1-3-4-2 1-3 are towards the firewall


Looking for a wiring diagram for a 1990 Honda CRX distributor?

NO