answersLogoWhite

0

Attaching a leaf spring to a chassis

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

A leaf spring swinging shackle is for?

allowing the spring to alter it's effective length when flexing


What are the torque specs for 2001 jeep Cherokee rear leaf spring shackle?

leaf spring front pivot bolt 115 ft/lbs leaf spring rear upper shackle bolt 115 ft/lbs leaf spring lower shackle bolt 80 ft/lbs


What is the name of the bracket that holds the rear leaf spring to the frame of a 1998 Ford F150?

I believe its called a rear leaf shackle.


How do you remove the shackle bushing in the frame of a 1985 S10 Talking about the bushing where the rear leaf spring shackle hooks into the frame?

The bushings are pressed into the eye of the leaf spring on each end. The leaf spring should be removed and the old bushing pressed out on a shop press then press a new bushing pressed back in. In the old days I used to burn the old rubber out of the bushing then chisel out what is left.


How can l lower my 1989 Chevrolet cheyenne in the rear It has leaf springs?

if the axle is on top of the spring: get a pair of longer front spring shackle if the spring is under the axle: Get a pair of spring blocks.


How long does a leaf spring shackle and hanger last?

The longevity of any leaf spring shackle and hanger depends on a few factors. For example, the age of the vehicle, frequency of the usage of the vehicle, the condition of the road and the weather where the vehicle operates etc. Naturally, in an older and heavily driven vehicle in a rough weather condition, the hanger and shackle might not last long. Whereas, in a well-maintained automobile, the springs can last more than 1,00,000 miles. An average lifespan of a set of leaf springs is around 2,00,000 miles.


On a 2004 Jeep Liberty where is the rear lift points on the frame for use with a floor jack?

I lift them on the frame rail next to the leaf spring shackle.


Why the front end of semi-ellipitc leaf spring are shackle and rear end are bracket?

The front end is bracketed to prevent shifting of the axle. The rear is shackled, so that as pressure is exerted and removed, and the spring exspands and retracts, it will have room to move.


What is a transverse leaf spring?

A set of leaf spring that is so mounted that it is at right angles to the length of the Vehicle is known as the transverse leaf spring.


What is the eye of a leaf spring for?

the eye of a leaf spring, assuming u mean the eye at end of spring, is used to bolt the spring to the vehicle


How do i Install shackles on your cj7?

To install shackles on your CJ7, first, lift the vehicle and support it securely on jack stands. Remove the existing shackle bolts and bushings from the leaf spring and frame. Align the new shackles with the leaf spring and frame mounting points, then insert the bolts and tighten them to the manufacturer's specifications. Finally, double-check the alignment and ensure all hardware is securely fastened before lowering the vehicle.


Optimized dimensions of a mono leaf composite spring?

optimized dimensions of a mono leaf composite spring