12 amps of electricity.
False
Amps (A) measure electrical current flow, while volt-amps (VA) measure apparent power in an electrical circuit, which is the combination of both real power (measured in watts) and reactive power. Essentially, amps refer to current, while volt-amps refer to total power.
Watts = Amps x Volts.
Electrical power = current x voltage Current is in amps
The electrical equivalent to torque is AMPS. Power in Electricity is Volts * Amps Where in a rotating shaft its RPM * Torque
Ohms=resistance in the wiring. Volts=your power. Amps=how much power u got;)
No, volt-amps (VA) and watts (W) are not the same. Watts measure real power in an electrical circuit, while volt-amps represent the apparent power, which includes both real power and reactive power.
Another homework or exam question? AC electrical power demand is measured in Volt-Amps. Electrical current is measured in Amperes. (Amps or Amperage.) Now you can write about how they can be compared.
a 1.5 kVa source of electrical power has the capacity to supply 100 volts at 15 amps, 300 volts at 5 amps, or 1000 volts at 1.5 amps.
You can't compare that. Ampere is a unit of electrical current; horse power is a unit of power.
Volt-amps and watts both measure power, but they are calculated differently. Volt-amps represent the apparent power in an electrical circuit, while watts measure the actual power consumed by a device. The difference lies in the power factor, which accounts for the efficiency of the device in converting electrical energy into useful work. Devices with a lower power factor will have a higher volt-amp rating compared to their watt rating. This affects power consumption because utilities charge based on volt-amps, so devices with a lower power factor may cost more to operate.
There are no amps in a voltage because they are quite different electrical units. They are related by the 'power equation' which is: watts = amps times volts