I would have to say your always safe with RCD.
The factory lift pump on a 6.6 Duramax is located in the fuel tank.
Remove the water hose from the top of your 1996 Chevrolet 2500 thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.
On a 2005 Duramax, the lift pump is located in the fuel tank. It is responsible for drawing fuel from the tank and supplying it to the engine. To access the lift pump, you typically need to remove the fuel tank, as it is mounted at the bottom of the tank assembly. Always ensure to take proper safety precautions when working with fuel systems.
Lift pump on a 2007 dodge 2500
Modle dch 2500 for power lift
journal diameter- 1.9482-1.9492 bearing clearance- .0015-.0035 cam runout- .0015 max intake lift- .2487 exhaust lift- .2537 all measurements in inches
First i gotta know what brand is your lift
Good info about raising front end by adjusting torsion bars.www.duramaxforum.com/forum/04-5-05-lly-performance-parts-discussion/4491-torsion-bar-adjustment.html
i use floor jacks
On the rear of the bars, there is a bolt on each side coming down through the cross member. Tightening these two bolts will lift the front end.
Body lift MAYBE. suspension lift ? NO...
go to universalcarlifts.com