Dash in dashboard stands for Dials and Switches Housing.
I think you may be talking about the dashboard dimmer switches.
An owner manual is the best reference to know what the switches on a 1993 Nissan Pathfinder do. All information an owner would need is in the manual.
The vacuum switches for the AC vents on a 1995 GMC Safari all-wheel drive van are located underneath the dashboard. The vacuum lines are also located underneath the dashboard.
I think you are asking about the three black things that look like switches. They are spaces made for optional equipment switches if it is so equipped.
Clutch safety switches are usually mounted under the dashboard above the clutch pedal, so that they are activated when the clutch is depressed.
To remove the dashboard on a 1974 Super Beetle, first disconnect the battery to ensure safety. Remove any screws or bolts securing the dashboard, typically found around the edges and under the instrument panel. Carefully detach any wiring connected to the dashboard components, such as the speedometer and switches. Once everything is disconnected, gently pull the dashboard away from the mounting points to complete the removal.
To repair the blue backlit dash button switches on a 1989 Buick Reatta, first, remove the dashboard cover to access the switches. Inspect the bulbs or LEDs for any signs of failure; if necessary, replace burnt-out bulbs with new ones that match the specifications. Reassemble the dashboard, ensuring all connections are secure, and test the lights to confirm they are functioning properly. If the issue persists, check the wiring and connections for any damage or corrosion.
The 1995 Mitsubishi flasher relay switch and the brake light relay switch can be found beneath the dashboard. Both switches will be on the drivers side of the dashboard, near the brake pedal.
The GM Safari was produced from the years 1985 to 2005. The vacuum switches for the AC vents on a 1995 GM Safari all-wheel-drive van are located underneath the dashboard.
To remove the dashboard from a 1966 Dodge Dart, start by disconnecting the battery to ensure safety. Then, remove the screws securing the dashboard panel, which are typically located around the edges and under the instrument cluster. Carefully detach any wiring harnesses connected to the gauges or switches, and gently pull the dashboard away from the firewall. Make sure to keep track of all screws and components for reassembly.
I have found the same thing. It is such a problem that unless I can improve the display I will be getting rid of the car asap in case I get speeding tickets.On right hand side of steering wheel, next to rear window switches, are two switches showing a big and small light on it. Press the switch with the big light on it to increase the brightness of the dashboard lightning. Is this what you wanted to know?JJ