Using an OSD (Oil Spill Dispersant) hose for diesel is not recommended unless it is specifically rated for fuel service. OSD hoses are primarily designed for handling oil and may not have the necessary chemical resistance or structural integrity to safely transport diesel. Always check manufacturer specifications and guidelines to ensure compatibility with the intended fluid to prevent leaks or failures.
OSD Beograd was created in 1945.
lower radiator hose for 353 detroit diesel,2 inches id s shaped 9" from top to bottom.
yes
How to check for leaks on vacuum hoses for a dodge diesel
Use the OSD buttons on the front of the monitor
If you were trying to get gas or diesel out of a tank just take a hose (preferably smaller to fit just what you need) just put the hose in he tank and suck it through the hose and a suction will be made for it to push through the hose. Have a bucket or something to put it in and you have gas out of your tank.
Follow the top radiator hose to the engine, the thermostat is under the fixture that the hose hooks into.
To unlock the OSD lock on a HCL LCD monitor, press and hold the Menu button on the monitor for 10-15 seconds until the lock icon disappears. This should unlock the OSD settings and allow you to make adjustments as needed.
You have a failed gasket, seal, or hose.
OSD (On Screen Display) lockout. To resolve the issue you can hold the power button of the monitor until you get another message something similar to "OSD unlocked"....if the problem continues. Switch of the monitor and remove the power cable and connect it again.
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
The thermostat on a Chevrolet Cavalier 1.7 diesel is located on the side of the engine. It can be found by following the upper radiator hose.